There are three main driving modes of electric vehicles: one is wheel drive, the other is center drive and the other is suspension drive. The electric bicycles in the market are mainly driven by wheel hub, which is better than rear wheel drive, but the front wheel drive performance is relatively poor.
Extended data:
Usage and maintenance methods:
1. First, adjust the height of the seat and handlebar to make them in the safest and most comfortable position, especially the height of the seat. When you need to stop during riding, it is best to land your feet at the same time.
2. Test whether the braking device is effective and reliable, whether the power supply is cut off after braking, and whether the motor stops working.
3. Check the power: It is particularly important to check the power on the display screen when starting, especially when it is used after being put on hold for a long time. In addition, check whether the electric horn, lighting and other related driving safety components are effective!
4. Check whether the rotating parts: front and rear wheels, pedals, cranks, sprockets, chains and flywheels are operating normally and whether there is any foreign body friction.
5. Check whether the tire pressure is appropriate.
6. First of all, you must obey the road traffic rules when riding. Don't run the red light, ride in the slow lane, and don't ride in the fast lane. Turn off the switch when the traffic is heavy and ride with your hands. Slow down when turning, and avoid sharp turning at a small angle when driving at high speed, resulting in excessive centrifugal force and an accident.
7. Don't bring people. Due to the small battery capacity and low motor power used in electric bicycles, the load capacity of general electric bicycles is about 80kg (including cyclists). If you take someone to ride, it will increase the load of the motor and accelerate the consumption of the battery, thus reducing the service life of the battery motor, which violates the provisions of the traffic law.
8. When riding uphill, on a bridge or against the wind, both electricity and manpower should be used to reduce the load of batteries and motors. Generally, electric bicycles have zero start function, that is, when they are at rest, they can start running by turning the switch and the speed control knob. But the starting current at this time is two to three times that of normal driving, which has a great influence on the motor and battery, especially the battery.
Therefore, in order to prolong the continuous mileage of one charge and the service life of the battery, you should first step on the pedal when you start, and then turn on the circuit after the pedal has a certain speed of three or four turns, which is particularly important in areas with large traffic volume and many traffic lights. Frequent zero starting will definitely shorten the service life of the battery.