Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and medical aesthetics - How to connect the counting relay with the punching distribution box?
How to connect the counting relay with the punching distribution box?
Connecting one of the cams to the signal input end of the counter; If there is no cam box, a proximity switch can be installed on the side of the fuselage near the slider to sense the top dead center position of the slider.

Punch press is a stamping press. In national production, stamping technology has been more and more widely used because of its advantages of saving materials and energy, high efficiency, low technical requirements for operators and products that cannot be machined through various molds.

Stamping production is mainly aimed at sheet metal. Blanking, punching, forming, stretching, trimming, fine punching, shaping, riveting and extruding parts can be made through the die, which is widely used in various fields. For example, we use switch sockets, cups, cabinets, plates, computer cases, and even missile planes ... there are many accessories that can be produced by punching machines through molds.

The power supply passes through the terminal of the control transformer 12V in the distribution box, and the uncontrolled transformer with the current of 100mA can be connected to the AC or DC power supply of about 12V by itself. The counter is equipped with a counting indicator light, which flashes once when counting. If the indicator light is on all the time, it means that the magnet is too close. If it doesn't count, take off the magnet for the time being. After the counter is powered off, the quantity can be kept for at least three days, which is convenient for production statistics. When the counter is just powered on, the number flashes, so you can press "CLR" directly to clear it. In use, you must press "RESET" and then "CLR" to clear it.

The electronic counter designed by punching machine adopts magnetic induction mode, non-contact counting and has power-off function. Specification: RH- 10C counting range 0-999999, input power: AC/DC 9 ~ 24 display digits: 6 digits, counting frequency: 50 times per second. Features: The position of the mounting hole is the same as that of the mechanical counter.