The belt buckle has no gear teeth and no buttonholes. The belt buckle that relies on a vertical roller to tighten the belt is called a roller belt buckle.

When choosing a roller belt buckle, you should choose a tooth lock with a larger number of teeth and a width of more than 1/2, which is stronger. The teeth should not be too sharp to avoid damaging the leather surface, and the tooth lock should not be too loose. For reasons of durability, the belt requires two layers of front and back leather to be sewn together, usually with seams. The best nail lock is two screws.

When choosing a roller belt, it is usually split and transferred into two layers of leather, with a fabric reinforcement layer filled in the middle to maintain toughness and tensile strength. The overall quality of the split-transfer two-layer leather belt is relatively reliable. If there is no middle filling fabric reinforcement layer, the second layer of skin can be torn by hand. Therefore, when choosing a belt, the key point is to have a middle filling fabric reinforcement layer.

Extended information

Tips on belt maintenance

It is best to use the belt buckle frequently and wipe it with a fine velvet cloth. If you encounter rain, moisture or mildew, use a soft dry cloth to wipe away the water stains or mildew spots. But never apply water and gasoline, because water can harden the belt, and gasoline can make the oil in the belt volatilize and cause it to dry out. The belt buckle has not undergone any waterproof treatment. If it gets wet when used in rainy days, please wipe it dry with a soft cloth to prevent stains or watermarks from leaving the surface and causing rust.

The main component of belts is protein, so they are prone to moisture, mold, and insects. For this reason, when using the belt, avoid contact with oil, acid and alkaline substances. Belts should be sent to a professional leather care shop regularly for thorough cleaning and disinfection. In the cleaning process using professional equipment and techniques, special agents for mold removal and sterilization are added to completely remove various germs and molds, fundamentally avoiding the occurrence of mold.