1, personnel engaged in operations must hold relevant certificates, and seriously abide by the safety construction regulations, dress flexibly, and it is forbidden to wear shoes with hard soles and slippery nails.

2, engaged in aerial work personnel should be a physical examination every year, suffering from heart disease, hypertension, mental illness, epilepsy are not allowed to engage in aerial work.

3, high homework to set up protective railings, support the safety net and install protective door, the operator should wear a seat belt.

4, high homework materials should be piled up smoothly, not on the limb and attached to the mouth of the cave, where there is a possibility of falling, to evacuate or fixed in time, to prevent falling cuts.

5, found that the safety facilities have defects or hidden dangers, should be reported in a timely manner, to endanger personal safety, must stop construction, eliminate hidden dangers rear can work at heights.

6. No one is allowed to move or remove safety signs without authorization. Because of the need of work, with the consent of the foreman, the safety sign is moved, removed and then reinstalled.

7, winter construction should take reliable anti-skid, cold, antifreeze, antivirus, fire safety measures.

8. Shout loudly that the operation safety facilities should be regularly checked and kept in good condition. The ladder shall not be short of gears, and shall not be elevated for use. The spacing between rungs should be 30mm. When in use, the upper end should be fastened, and the lower end should take anti-skid measures. It is forbidden for two people to work together on the ladder. If it is used for extension, it must be fastened. When using a ladder at the passage, someone should supervise or set up a fence.

9, aerial work, should be combined with the engineering characteristics, formulate corresponding various safety protection technical measures.

10, each project in the preparation of construction organization design and construction scheme, should include all kinds of safety technical measures involved in the project, and try to take ground operations to reduce all kinds of high-altitude operations.

1 1. There are a wide range of safety technical measures for working at heights, such as setting safety signs, hanging safety nets and wearing safety belts. In order to clarify responsibilities and strengthen safety management, before construction, the project leader and safety officer shall make safety technical disclosure to relevant personnel step by step.

Workers working at heights can only carry out construction after all safety technical measures and protective articles have been solved and implemented. All kinds of facilities and equipment used for aerial work should be inspected before being put into use, and can only be put into use after being confirmed to be in good condition.

12. The aerial workers should have a physical examination. People suffering from heart disease, hypertension, psychosis, epilepsy, etc. Personnel who are not suitable for working at heights shall not be arranged for working at heights.