How to use the copier:
Step 1, preheating. Nowadays, office equipment generally has a sleep function, so before copying, it is generally necessary to let the equipment have a warm-up process, and pressing any key on the equipment can wake it up. If you don't sleep, but turn it off, you must turn on the switch and let the boot have a process. If it is a professional copier, there is usually a "preheat" button.
Step 2: Make sure that the word "Ready" appears on the machine screen before copying, as shown in the figure below. How to use the copier and the matters needing attention in using it.
Step 3: Place the original on the exposure glass, with the side to be copied down on the exposure glass, and the original should be aligned with the left rear corner.
Precautions for using the copier:
1, the correct placement of the copier: attention should be paid to preventing high temperature, dust, vibration and direct sunlight, and at the same time, a good ventilation environment should be guaranteed, because copying will produce trace ozone, and the operator should go outdoors to rest every working time. Minimize moving at ordinary times.
If you want to move, you must move horizontally and not tilt. In order to ensure the best operation, at least 90 cm should be left and right of the machine, and 13 cm should be left on the back (if the machine is connected to a sorting machine, it needs about 23 cm). )。
2. Power supply requirements for photocopiers: stable alternating current should be used for connection, and the power supply quota is: 220-240V, 50Hz, 15A. Turn off the power switch of the copier after work and cut off the power.