Materials and tools: small milk powder cans, red paper, flash tape, golden tape, awl, double-sided tape, white glue, spring paper-cut.

First cut a piece of red paper (the height of the paper is slightly lower than that of the small milk powder can, and the circumference of the milk powder can is 2cm), roll it up along the mouth of the can, and stick the end with double-sided tape.

Drill a hole in the center of the milk powder cover with an awl and enlarge it. Fold and fasten about 20 cm of onion belt, and then pass through the hole (the thread end is left in the cover).

Next, stick a golden tape (half inside and half outside) on the edge of the can bottom, fold the exposed tape to the can bottom, and finally stick a paper-cut spring character, and the lovely firecrackers sugar can is completed.

Firecracker candy jar

Materials and tools: 2 milk powder cans of the same size, red paper, golden tape, double-sided tape, wide tape, onion tape, white glue and awl.

Collect two milk powder cans with the same size, connect the bottoms of the two milk powder cans with wide adhesive tape, cut out 1 red paper (the height is slightly lower than the two milk powder cans and the length is 2cm longer than the circumference of the milk powder cans), roll the red paper along the cans, and stick the ends with double-sided tape.

Cut 1 piece of red paper slightly smaller than the plastic cover of the milk powder can, stick a circle of golden tape on the edge of the plastic cover (half of which is exposed from the cover), and stick the red paper on the plastic cover to make it flat.

Then cut the exposed golden tape into pieces, fold it inward and stick it on red paper, make a hole in the center of the cover with an awl, and then pass the knotted flash tape through (the thread is left in the cover).

Finally, cover it and stick the paper-cut spring characters on it! Firecrackers, large and small, are ingenious and can be used to hold candy and snacks.