First, the bought plates are processed into plates with uniform thickness and smooth surface, and then they are sawed and spliced with ordinary white latex. Then it was fixed and dried after a day.

Secondly, the treated board must be polished, then putty and polished for one day. If it is uneven, it must be smooth, because it depends on the smoothness and smoothness of the paint. Finally, apply the primer. After polishing for one day, you can use water sandpaper, starting at 600, and then painting and polishing above 600 until it feels smooth. Finally, apply a top coat, which is thin and uniform. It will be finished in a week.

Finally, you can draw some beautiful patterns on the wooden box. If you have special requirements, you need to make special samples. Soak the prepared pattern in water for a few seconds, take it out and stick it on the wooden box as required, then hang the water out with a scraper and let it stand for not less than 10 hour, then gently peel off the plastic film on it and cover it with a top coat.