Prepare tools
Installation tools Before installing the ceiling lamp with mineral wool board, you should first prepare the required tools, including electric drills, screws, expansion screws and electric hammers. These types of electric drills need bits of about 6 mm, which is the most common one, but you still need to prepare with both hands, because the size of some lights needs to be seen.
Installation step
During the installation, first take out the prepared tools and start the installation according to the instructions in the manual. First, disassemble the hanging plate above the lamp, then adjust the position to the sucker hole, fix it with screws, then punch it with an electric drill, the size must be appropriate, not too big or too small, then put the expansion screw in, finally install the hanging plate, then fix it, and then install the light bulb and lampshade in turn.