How to make a love picture This paper uses a variety of PS production techniques. First, the external water effect is made with the filter, then it is mapped with the splash map of water, and the overall special effect is made with the love map. Finally, the color tone is changed. In short, this is a wonderful PS synthesis course.

Final effect

& lt click on the small picture to see the big picture >

1. Create a new document with 1024*768 pixels, and fill the background with black.

Create a new layer, name it "Ribbon 1", tick off the path shown in figure 1 with the pen tool, and fill it with white after it becomes a selection. The effect is shown in Figure 2.

& lt figure1>;

& lt figure 2>

2. Lock the layer and execute: filter >；; Artistic effect > For plastic packaging, the parameter setting is shown in Figure 3 and the effect is shown in Figure 4. Press Ctrl+F to enhance the effect after confirmation, and press it for about 9 times, and the effect is shown in Figure 5. The filter effect is random, and the effect is roughly similar.

& lt figure 3>

& lt figure 4>

< figure 5 >

2. Lock the layer and execute: filter >；; Artistic effect > For plastic packaging, the parameter setting is shown in Figure 3 and the effect is shown in Figure 4. Press Ctrl+F to enhance the effect after confirmation, and press it for about 9 times, and the effect is shown in Figure 5. The filter effect is random, and the effect is roughly similar.

& lt figure 3>

& lt figure 4>

< figure 5 >

5. Tick off the selection shown in Figure 9 with a pen, and select the Brightening and Deepening tool to handle the light and shade. The effect is shown in figure 10. At this point, the ribbon is basically completed, and some dark corners are gradually improved.

< figure 9 >

& lt figure 10 >

6. Open the splash material shown below, use the lasso tool to intercept some water drops, then copy them, return to the ribbon file and paste them in. Change the layer blending mode to "color filtering", adjust the angle and size appropriately, and arrange according to the flow direction of the ribbon, as shown in figure 12.

& lt figure11>;

& lt figure12 >;

7. Open other water drop materials and copy them as above. The layer blending mode is changed to "color filtering", and some materials need to be adjusted by using the deformation tool. The process is shown in figure 15- 17.

& lt figure13 >;

& lt figure14 >;

& lt figure15 >;

& lt figure16 >;

& lt figure17 >;

8. Now start making the dark part of "Ribbon 2", bring up the selection of "Ribbon 2", create a new layer on top of the layer, and set the foreground color to black. Select the brush tool, set the opacity of the brush to about 10%, and deepen the bottom and upper edges with the brush. The effect is shown in figure 19.

& lt figure18 >;

& lt figure 19 >

9. Make water droplets in the corner, intercept the water droplets as shown in Figure 20 from the water droplet material, copy them in, press Ctrl+T to deform, right-click to select deformation, as shown in Figure 2 1 and adjust the angle appropriately, and the effect is shown in Figure 22.

< figure 20 >:

& lt figure 21>;

< figure 22 >:

10. Open the heart-shaped material below, dig it out with a magic wand, drag it in and put it under the "Ribbon 2" layer. The effect is shown in Figure 24.

< fig. 23 >;

< figure 24 >:

1 1. Return to the "Ribbon 1" layer, add layer mask, and erase the upper part with a black brush. The effect is shown below.

< fig. 25 >;

12. Open the material shown in Figure 26, use lasso to intercept some splashes and paste them on the "Ribbon 1" layer, change the layer blending mode to "color filtering", and adjust the angle and size appropriately. The effect is shown in Figure 27. If the brightness of the splash is not enough, you can copy the current layer and adjust the opacity appropriately.

< figure 26 >:

< figure 27 >:

13. Create a gradient map adjustment layer on top of the layer. The color settings are shown in Figures 28 and 29, and the effect is shown in Figure 30.

< fig. 28 >;

< fig. 29 >;

< fig. 30 >;

14. Create a new layer and press Ctrl+Alt+Shift+E to seal the layer. Execute: filter >; Other > user-defined, and the value defaults. After confirmation, change the opacity of the layer to 30%, add layer mask, and erase the heart-shaped part with a black brush. The effect is shown below.

& lt figure 31>;

15, and finally adjust the details to complete the final effect.

Excuse me, how are those dazzling lights and ribbons made? With what software? In this example, photoshop is used to create a very creative picture effect. The picture is nested in a ribbon, and with shadows and highlights, it feels very realistic, smooth and elegant. The final effect is 1. Draw the tie effect below with the pen tool. 2. Import three pictures and arrange them as shown below. You can choose the material you like to wear. 3. Merge three pictures into the same layer, set the opacity of the layer to "50%", and edit-transform-deform. Import other pictures in the same way. 4. Create four groups, named 1, 2, 3 and 4 respectively, and put the previous groups of pictures in different groups. 5. Load the graphic selection created in step 1 and add a mask to the corresponding group. 6. Create a new layer in the layer group 1 and use the gradient tool to add shading effect. Similarly, apply a gradient to other shaded parts. 7. Create a new layer and add a highlight effect. 8. Add a stroke effect. Finally, complete the final effect.

How do you make the straight ribbon under the words in the non-mainstream avatar with words? Download a beautiful picture of Xiuxiu. Find this.

Online materials will have

Adjust the length and width yourself, and then add text.