1. First of all, before installing the aluminum cover plate of the silo, it is necessary to clean up the sundries in the silo to ensure the cleanliness of the construction site, and pay attention to safety during cleaning to avoid injury.

2. Then evenly install the fixing bolts around the silo to ensure that the bolts are vertical to the ground, and the number and spacing of the bolts should be reasonably set according to the size and load of the silo.

3. Then install a gasket on the fixing bolt to play a role in buffering and fixing. Gaskets should be made of corrosion-resistant and high-temperature resistant materials to ensure service life and safety.

4. Then put the fuel tank aluminum on the cover plate on the bolts and washers to ensure that the cover plate is flush with the ground. During installation, attention should be paid to the edge alignment of the cover plate and the firmness of the fixing bolts.

5. Then tighten the bolt with a wrench or screwdriver to ensure that the cover plate is firmly fixed. When fixing bolts, pay due attention to avoid damage to the cover plate or looseness due to over tightening.

6. Finally, check the construction quality, including the flatness of the cover plate and the firmness of fixation. If there is any problem, repair or replace it in time.