I have always liked the appearance of the Mazda 6. After watching car reviews and other videos, and after a friend bought a 12-year-old Puma some time ago, it aroused the primitive cry in my heart; so I started to Xianyu and local car dealers were looking for cars everywhere; their only goal was the 2007 2.3 coupe; so. . . .

The photo sent by the car dealer looks pretty good, the 2.3 coupe in January 2007

The main driver is electric, the passenger driver is manual

The rear is rounded , what attracts me is the rear wiper

This gear is so annoying that I don’t want it

The meter shows 12WKM

After inspection and test drive, this car : 1. There was a rear-end collision in the front, the anti-collision beam sheet metal, the heat dissipation bracket were repaired, the throttle sensor was glued, and the air intake grille box was also damaged; 2. During the test drive, there was an abnormal noise in the right front, and the D gear brake was shaking 3. The driver's window lift control The rear window cannot be opened, the door latch is faulty, the spare tire subwoofer is faulty, and the car key comes and goes. 4. The valve cover gasket leaks oil, the left half shaft leaks oil, the oil seal leaks oil, and water leaks from the left and right sides of the trunk; 5 , the four tires were aging; to put it simply, this car costs money; so I took it home out of sentiment;

The buttons on the original car were already broken and I bought a 55 from TB Things to pay attention to when replacing the Dayang; 1. The battery bracket should be cut off from the original car with glue, and the right one should be repaired, because the one you bought is not the original one, so you know; 2. Replace the Mazda LOGO with the one you bought. Use sandpaper to polish the surrounding area of ??the new case;

Remove the inner motherboard and install the case

Put the back cover on

Complete

At present, the problem of entering the car from the first step of driving has been solved; then there is the problem of jitter; this is as simple and crude as replacing the machine foot;

The right machine foot is already offset;

The middle machine leg looked cracked when I looked at it;

Replace the spark plug

After replacing the legs, the driving feeling started to feel a little better, and the steering wheel no longer looked like it was about to take off;

Then I ordered a minor maintenance at the Tu Rover event, but the maintenance technician was deceived and the engine oil The screws were glued on, and then they slipped; because I didn’t know whether it was the screws or the oil case that slipped; so I had to buy an oil case;

The black glue glue screws, one Pomezizi

Replaced the oil pan, minor maintenance completed

Purchased imported machine feet, replaced the labor 123 yuan for the right side, 420 yuan for the left side, 350 yuan for the rear side, 240 yuan for the air filter, 39 yuan for the air conditioner Filter element 25 yuan NGK platinum spark plug 100 yuan Original oil pan 260 yuan Replacement of labor 150 yuan Gear handle 59.19 yuan Engine oil Mobil 1 5L 386 yuan Dunlop LM705 Cost 1356 yuan Current total cost: 3508.19 yuan Will be updated later

One more update; I see many car friends saying that the car is in poor condition. What I want to say is that you are all wrong. The car is in extremely poor condition. Simply put, if you want to restore it to a better state, you should at least restore it. It’s 500. As for why, I’ll talk about it later

Supplement: I bought a Domingo kit

The welding is completed

The reversing and steering ones I bought do not have light guides. However, according to the material of the LED ceiling light, I found an acrylic plate instead, and it felt okay;

The steering wheel is made of black tea transparent acrylic

The reversing wheel is made of double-light opalescent acrylic

Lamp sealing glue, chrome-removing water, and accessories are also here. Because I have been busy with other things recently, I haven’t started to disassemble the lamp yet

The bracket in this position is welded on later

p>

This position makes me feel like the force on the front mouth caused the fulcrum to deform, and then the sheet metal was re-welded, but there is no problem with the engine; if you want to replace this Yuanbaoliang, it will cost 350 yuan to dismantle the car, TB4~ 500 yuan; I choose to use it like this first

The half shaft is leaking, so I don’t care about it for the time being;

Two hood hydraulic rods are 51 yuan each, and the front jack is 148 yuan per foot. Pad 75 yuan Car interior light + gear light 46 yuan Domingo tail light kit 320 yuan Light guide acrylic 12 pcs 20 yuan Car roof sink buckle 20 pcs 9.5 yuan T20 male and female seat 12+11.5 23.5 yuan H1 bulb 2 pcs 40 Yuan gold light fog lamp 2 pieces 49 yuan This purchase: 782 yuan