2. Influence of seawater on bearing performance [J]. Journal of Mechanical Engineering, Series J: Engineering Tribology, 2009.
3. Coupling of dynamics and contact mechanics of artificial hip joint in pendulum model, 2009.
4. Application of computational fluid dynamics and fluid-solid coupling method in rotor-bearing system, 20 10.
5. Eddy current loss of electromagnetic thrust bearing, Journal of Xi 'an Jiaotong University, 2004, Vol. 16,No. 1.
6. Analysis of journal bearing and rotor system with computational fluid dynamics and FSI technology [C].// The 5th China International Tribology Symposium.
7. Dynamic Design of Mechanical Seal Static Ring, Lubrication and Sealing 2005, 1, (EI, 05 16905 1089).
8. Influence of mechanical seal on dynamic performance of rotor bearing system, Journal of Anjjiaotong University, No.7, 2004, (EI 04478468909).
9. Study on Mechanical Properties of Composite Bearing, Journal of Anjjiaotong University, 1999, No.6 (EI, AN5 120 194).
10. Performance analysis of gas lubricated foil radial bearing (1) Calculation of foil elastic deformation by nonlinear shell theory, proceedings of the second IC-HBRSD conference, National Defense Industry Press, 1997.
1 1. analysis of gas lubricated thrust bearing-stiffness and damping coefficient of bearing, proceedings of the second IC-HBRSD conference, national defense industry press, 1997.
12. hydrodynamic lubrication bearing, mechanical design manual, chemical industry press, 2002.
13. hydrodynamic lubrication bearing, mechanical design manual, chemical industry press, 2002.
14. gas lubricated bearings, mechanical design manual, chemical industry press, 2002.
15. Computer-aided experimental measurement system for sliding bearing performance, case analysis and discussion of tribology design, Southwest Jiaotong University Press, 2000.
16. expert system for sliding bearing design, case analysis and discussion of tribology design, Southwest Jiaotong University Press, 2000.
17. Construction of bearing network database, equipment manufacturing, No.2, 2003
18. Experimental study on dynamic coefficient of oil film, Tribology International, 2004, Vol.37, No.3 (SCI, 03507773509, EI03507773509).
19. Study on thermal lubrication performance of large radial tilting pad sliding bearing, Journal of Anjjiaotong University, 1999, No.8, (EI, AN5308522)
20. electromagnetic field analysis of thrust electromagnetic bearing, journal of tribology, 2000,No. 1, (EI, AN5309763).
2 1. turbulence similarity analysis of radial sliding bearings, mechanical science and technology, 1998. No. 1, (EI, AN4 186874)
22. database method of nonlinear oil film force of sliding bearing based on poincare transform, journal of tribology, 200 1, No.3 (EI, AN6755330)
Study on the performance of two kinds of support bearings for 23.300 MW steam turbine unit, Turbine Technology, 1998, 1, (EI, AN4298692)
24. Windows-based object-oriented sliding bearing design expert system, Mechanical Science and Technology, 1995, No.3, (EI, AN3025655)
25. Influence of fulcrum position distribution on dynamic lubrication performance of radial tilting pad sliding bearing, Lubrication and sealing, 1999, No.3, (EI, AN4767705)
26. Application of calculus control parameters based on H∞ frequency domain shaping in magnetic bearing, Journal of Anjiaotong University, 200 1, No.6 (EI, AN6843856).
27. A CAT-based method for testing the characteristics of sliding bearings, lubrication and sealing, 1999, No.5. (EI,AN4298692)。
28. Study on dynamic characteristics and stability of variable step radial sliding bearing with follower coupling, Journal of Tribology, No.6, 2000 (EI, AN6650938).
29. Determination of oil inlet boundary conditions of circular tilting pad thrust bearing, Journal of Tribology, 200 1, No.2, (EI, AN6700238).
30. Object-oriented bearing design expert system, Electromechanical, 1995, No.5.
3 1. Developing an object-oriented bearing design expert system with C++ and Windows, Computer Aided Engineering, 1995, No.6.
32. Development of Expert System for Turbine Sliding Bearing Design, Turbine Technology, 1995, No.4.
33. Development of object-oriented expert system for thrust bearing design, Mechanical Science and Technology, 1995, No.3.
34. Finite Element Analysis of Mechanical Properties of Fingertip Seal Profile, Journal of Northwestern Polytechnical University, No.2, 2002.
35. Friction analysis of rubber-metal friction pair based on rough contact theory, Journal of Anjjiaotong University, No.3, 2002
36. Experimental study on high-speed roller chain, Petroleum Mining Machinery, No.4, 2000.
37. Similarity analysis of journal bearing characteristics, proceedings of the second IC-HBRSD conference, National Defense Industry Press. 1997
38. Experimental study on transient disturbance of rotor bearing system stability, dynamics, acoustics and simulation, 1999, ELSEVIER.
39. Research on Variable Structure Sliding Bearing, 1st International Mechanical Engineering Conference, 2000, Shanghai.
40. Thermal Transient Analysis of Sliding Thrust Bearing, 1st International Conference on Mechanical Engineering, 2000, Shanghai.
4 1. nonlinear oil film force analysis of hydrodynamic bearing considering thermal effect of lubricant, the first international conference on mechanical engineering, 2000, Shanghai.
42. Stability and Response Analysis of Symmetrical Rigid Rotor-Bearing System, Proceedings of the 5th International Frontier Conference on Design and Manufacturing, 2002, (EI, 0342768 1 183, ISPT:BY 15E).
43. Description of thermal effect of viscoelastic body by fractional calculus constitutive law, Proceedings of ACMD, JSME, Iwaki, Japan, 2002.
44. Equipment data publishing and sales. Proceedings of the International Conference on Remote Monitoring and Intelligent Maintenance System with Datasocket, Xi 'an, 2003.
45. Experimental Research on MEMS Acceleration Sensor, Proceedings of the International Conference on Intelligent Maintenance System, Xi 'an, 2003.
46. Systems and subsystems: Some aspects of multibody dynamical systems, Proceedings of ACMD, 2004, Korea.
47. A multifunctional digital ultra-low power thermometer, Electronic Measurement and Instrument, 2004, V.2, The 6th International Conference on Electronic Measurement and Instrument, 2003, (ISPT: BX80t, EI, 04278249008).
48. Oil film dynamic coefficient testing system, Proceedings of SPIE-International Society of Optical Engineering, Vol. 5253, 2003, (EI, 042 18 170006).
49. Calculating the center distance of chain drive by nonlinear equation method, Journal of Anjjiaotong University,No. 12, 2000, pp. 47-50.
50. Analysis of comprehensive strengthening test of roller chain, Journal of Anjjiaotong University, 200 1,No. 1,No. 179- 182.
5 1. Wear and corrosion of bottled beer chain, Journal of Xi Jiaotong University, 200 1, No.4.
52. Theoretical study on dynamic reliability of single-disk rotor system, Mechanical Science and Technology, 200 1,No. 1.
53. Study on Thermoelastic Fluid Lubrication of Large-scale Hydrostatic Radial Tilting Pad Bearings, China Mechanical Engineering, 200 1, Vol. 12, No.2..
54. Transient analysis of nonlinear motion of rotor considering bearing thermal effect, Journal of Anjiao University, 2002,No. 1.
55. Dynamic analysis of single disk symmetric viscoelastic rotor bearing system, Journal of Anjiao University, No.5, 2002, (EI 04478468909).
56. Influence of oil inlet pressure on static and dynamic characteristics of tilting pad radial sliding bearing, Lubrication and sealing, 200 1, No.4.
57. Performance analysis, lubrication and sealing of radial sliding bearing with tilting pad and fixed pad, 200 1, No.5.
58. Two-dimensional meshless Galerkin? Study on finite element coupling method, mechanical strength, No.3, 2002
59. Fractional derivative constitutive law describes thermal coupling viscoelasticity of damping materials, Journal of Mechanics, No.4, 2002.
60. Analysis of bearing dynamic system under linear and nonlinear oil film force, Journal of Ordnance, No.2, 2002.
6 1. A Method for Determining the Mixing Boundary Temperature, Mechanical Design, No.8, 2002
62. Deformation analysis of logarithmic spiral fingertip seal assembly, Mechanical Science and Technology, No.6, 2002
63. Application of ADXL 202 acceleration sensor in vibration test, Sensor Technology, Vol.22, No.3, 2003.
64. Analysis of hysteresis characteristics of fingertip seal, Journal of Mechanical Engineering, 2003, Vol.39, No.5. 。
65. Analysis of the influence of axial dimension on fingertip sealing performance, Gas Turbine Test and Research, 2003, Vol. 16, No.2. 1
66. Thermodynamic lubrication calculation of sliding bearing with mixed boundary temperature, Journal of Mechanics, Vol.23, No.4, 2002.
67. Application of CAN Bus in Locomotive Monitoring System, Electronic Engineering, Vol.29, No.4, 2003.
68. Design and manufacture of digital low-power temperature measuring instrument, No.2, 2004.
69. Nonlinear oil film force database of sliding bearing considering oil inlet pressure, Journal of Tribology, No.3, 2004, (EI, 044 184047 16).
70. Interface Technology between MSP 430 and I2C Bus, Electronic Products World, No.4, 2003.
7 1. digital MEMS acceleration sensor ADXL202 and its application, instrument technology and sensor, No.8, 2003
72. Dynamic analysis of hydrodynamic bearing-rotor system based on neural network, International Journal of Engineering Science, Vol.43, No.5-6, March 2005, (EI, 05 199090252).
73. Study on Electromagnetic Damping of Magnetic Levitation System of Moment of Inertia Test Platform, Journal of Anjiao University, 200 1,No. 12, (EI, AN6966539).
74. Experimental study on dynamic characteristics of four-tile tilting pad sliding bearing, Journal of Tribology, 200 1, No.4, (EI, AN69084 1 1).
75. Dynamic performance analysis of spiral groove liquid mechanical seal, Journal of Jiaotong University, No.5, 2004, (EI, 043 1829643 1).
76. The cantilever thin plate hydrodynamic lubrication gas bearing performance research? Calculation of elastic deformation of thin plates by nonlinear large deformation method of thin shells, mechanical science and technology, No.6, 2000.
77. The influence of different water content of lubricating oil on the performance of sliding bearing [C]. //The 8th National Conference on Equipment and Maintenance Engineering.