Transverse cutting refers to the cutting direction when the car is winded and window film. The transverse direction of the glass is consistent with the curling direction of the film. Vertical cutting is opposite to horizontal cutting, and the curling direction of the cut film is opposite to the lateral direction of the glass.

When the transverse cutting film is baked on the left and right sides of the glass, the left and right areas are small, the size is narrow, the film is not easy to shrink, and the construction is difficult; Vertical cutting, when baking the film up and down the glass, the up and down area is large, the film is easy to shrink, the bubbles can be evenly divided, and the construction is easy, effective and safe.

Extended data:

Precautions for car film pasting

1. Before pasting, check whether the window glass is installed in good condition and whether the car glass is complete, so as to ensure the normal operation of subsequent pasting. Before pasting the film, the necessary parts in the car must be covered to prevent liquid from infiltrating.

2. When pre-laminating, measure the dimensions of the front and rear windshields with a ruler, and laminate according to the measured dimensions.

3. Dry-bake the insulation film, so that the insulation film can be fully pre-shrunk. In order to further improve the consistency of thermal insulation film, it is necessary to wet bake the thermal insulation film.

4. In the process of cleaning the installation liquid with a wiper, scrape the installation liquid between the thermal insulation film and the window glass as much as possible, which can reduce the drying time of the thermal insulation film and obtain better bonding effect, overall performance and visual effect.

Baidu encyclopedia-car window film