Many people think that decorating and installing gusset plates is a very troublesome thing. It is difficult to install the gusset plates quickly and accurately. In fact, this is mainly because everyone does not know how to install gusset plates. , I am not very clear about some precautions. What are the methods for installing the gusset plate? What are the precautions for installing gusset plates? This all needs to be understood in advance, let’s introduce it to you below.

1. How to install the gusset plate

1. Aluminum gusset plate installation method: When installing the aluminum gusset plate ceiling, you need to press lightly in sequence along the flanging parts, and then After both sides of the square plate are completely stuck into the sub-keel, and then pushed tightly, rough handling is strictly prohibited; remember that the edge aluminum strips need to be straightened to fix the edge aluminum plates.

2. Plastic decorative gusset plate installation method: Nail the wooden frame first and then install the gusset plate frame. The three sides should be installed into the frame groove one by one, and thin iron nails should be nailed to the wood in the middle. On the frame and spaced apart, if you don't know where to nail it, you can open the gap installed by others and you can see at a glance, then seal it. When installing, you need to first determine where the ceiling is suspended, and then nail the wooden shelves after laying a horizontal line. Nail a 600*600 shelf for a large area and 400*400 for a small area. Then fasten the buckle board and install one snap board each time. Length according to screw. Also, first determine the height and then cut the wood square, then use bubble nails or screws or 419 horse nails on the corner lines. If it is not easy to fix, use glass glue. Then shorten the gusset plate, and then bend it and snap it in.

2. What are the precautions for installing gusset plates

1. PVC gusset plates should not have defects such as bubbles, peeling, cracks, missing corners, dirt and pattern defects, and the surface should Smooth, the edges should be neat, and the color should be consistent; the hole spacing of the perforated board should be arranged neatly, and the plywood and wood fiber board should not be degummed, discolored, or decayed; when the PVC gusset board is to be pasted or painted, the seams should be painted with white latex and finely pasted. Cotton fabric, with at least 5mm overlap on both sides of the seam.

2. When installing the ceiling aluminum gusset plate, pay attention to gently pressing along the flanging parts, and fully insert both sides of the square plate into the sub-keel, and then push it tightly. It is strictly prohibited to install and unload the aluminum strips by force. The card edge straightens the card fixed edge aluminum plate. According to the design requirements, the ceiling of this project uses 600mm*600mm punched aluminum gussets.

3. When installing the aluminum gusset plate ceiling, in the kitchen, first fix the hose flue of the range hood, determine the position of the hood, and then suspend the ceiling; in the bathroom, install the bathroom heater and exhaust fan first, and then suspend the ceiling. First, be sure to line up the pipes for the bathroom heater and water heater.

4. Pay attention to the power cord of the bathroom heater. It needs to be wrapped in a soft plastic tube and wrapped in tape. This is to prevent the cross section of the aluminum gusset plate from scratching the plastic skin of the power cord and causing leakage. accident, so it is safer to wrap the power cord with a hose.

Once the gusset plate is installed incorrectly, it will cause the overall effect. Therefore, we must first understand some issues in this area when installing the gusset plate. The above editor introduced the methods and precautions for the gusset plate installation. Everyone understands it.