Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and beauty - How to repair the wheel frame wear
How to repair the wheel frame wear
Pacific auto network 1. Check the scars. If the inside of the hub is not damaged, it can be repaired simply. Wipe around the scar with paint thinner to remove dirt; 2. It is difficult to remove the dirt in the deepest part of the scratch. At this time, you can thoroughly clean it with a toothpick; 3. In order to prevent irrelevant parts from being smeared by mistake, it is best to carefully stick adhesive tape around the scar; 4. Tidy up the nib and apply decorative paint. The paint will shrink slightly after drying, so it's better to apply it a little.

After painting, it will take about a week to dry completely. After drying, soak the waterproof paper in soapy water to make the surface smooth.

6. Wipe with water-resistant paper, then polish with mixed liquid, and then wax.

Primer bright paint must choose high-temperature special hub paint and must be baked at high temperature. If it is deformed, you have to go to the shaper to check which value is wrong. Drawing requires an automatic plotter. It's easy to say, and many details need to be learned. The wheel hub is a very important spare part, so the maintenance should not be sloppy. Never use sheet metal ash and inferior paint to repair, it is easy to collapse and peel off.