Step 1:
Start by combing your hair from your forehead to the back of your head. Then from the top of the head to the hairline of the neck, take a vertical partition in the center of the back of the head. Follow this vertical zoning method and pull your hair back away from the top of your head. Tilt your fingers down to the neck and then trim them, which will produce a sense of weight accumulation.
Step two:
Trim the second part parallel to the first part and use the first part as a guide line. Trim carefully according to the guide line, and then continue to take the vertical partition and trim at the same angle.
Step 3:
Remember to keep your hair moist and even during trimming.
Step 4:
When you reach the corner of the skull, the partition becomes more inclined. Bring all the hair pieces in the corner to the front: in this way, you gain weight in both vertical and horizontal planes.
Step five:
Continue to use this zoning method from the top of your head to the back of your ear.
Step 6:
For the side part, start with the horizontal division method, and comb all the hair pieces on the top of the head to the other side along the length of the temple, leaving a length. Now pick up the last partition behind the ear and pull the hair piece out of the head at 90 degrees vertically. This is the guide line of the side part. The side pulls out the hair piece in a vertically divided way, and the angle of the finger is downward close to the hairline part.
Step 7:
After the back of the head and the side parts are completed, comb all the hair on the top of the head backwards and divide it into two parts from the middle. Take the existing length above the middle of the back of the head as the guide line, trim it vertically behind the ear and connect it with the long hair piece on the top of the head.
Tip: the connection of the top of the head is only carried out in the back room.
Steps 8 and 9:
The front part of the ear is vertically separated and brought back to the position behind the ear. Lift the hair piece upward and outward, keeping the front length. By bringing the hair piece to the previously completed hair piece, a square shape can be obtained at the corner of the head and stomach that runs through the back of the head and both sides, which is more suitable for the skeletal characteristics of men.
Steps 10, 1 1, 12:
Repeat the same zoning and pruning on the other side, and the steps follow the guide line accurately.
Step 13:
Hair pieces in the hair rotation area are pulled up vertically, and other hair pieces are pulled back and up to keep the length of the front hair pieces.
Step 14:
Cut out the shape of the outer line along the natural growth direction of hair with the tip of scissors for finishing. This will give you a more fluffy feeling. From the lateral line of the neck to the temple.
Step 15:
This is the "pure energy" hairstyle after the end, and you can dye it now.
"Meteor shower" hair dyeing technology
This is a very clever way to dye hair, and different shades and tones are shown in this man's hairstyle.
The color used here is 10 light gold, mixed with 12% dioxygen emulsion. There is also a natural brown with a depth of 5, mixed with 6% dioxygen milk. When choosing a color, be sure to choose the complementary color of the natural tone.
Step 1:
First of all, in a fully shaped hairstyle, the dye paste absorbed by the tip of the hair-cutting comb is very freely and gently combed on the surface hair piece of the hairstyle. The color used now is natural brown. Painting is picturesque.
Step two:
Be careful not to comb the color to the hair root position here, and only use a light force to "draw" the color to the top of the head.
Step 3:
Now light gold is applied to other parts of the hairstyle, starting from the upper part of the back of the head and following the direction of the hairstyle.
Step 4:
The "meteor shower" dyeing method is especially suitable for Taiwan Province men's hair styles, which adds a vivid and interesting but natural effect to the hair styles.
Step five:
Continue to apply the first color as shown in the figure, through the back part of the hair rotation.
Step 6:
Now the second color is painted in the same way, and light tones have been painted between the hair pieces: the complementary effect of light and dark tones can better highlight the texture of the hair style.
Step 7:
Similarly, don't comb the color to the hair roots.
Tip: This hair dyeing technique can only be used on hair styles that have been cut. If this' meteor shower' technique is carried out before the hair is cut, most of the colors will disappear when the hair is cut.
Step 8:
Follow the direction of the hairstyle from the front hairline to the back of the head.
Step 9:
Apply a dark color downward, blend with the natural hair color below, and heat according to the manufacturer's instructions.
Step 10:
This is the effect after the end: the dyeing technology of Meteor Shower blends the natural tone of hair, creating a strong visual effect of luminosity and tone, while retaining the charming masculinity. There is also the "pure energy" of combining traditional lines with softness: the changeable effect tailored for everyone. The other two are fashionable and classic hairstyles from Sassoon.