Product introduction Wall covering renderings Wall covering is made of wood fiber and natural fiber as the main raw materials through special scientific technology. It is a new indoor wall top that is currently quite popular in North America and Europe. Environmentally friendly decorative materials.

It not only has a unique texture and three-dimensional relief, but also can create a high-grade visual effect of simplicity, fashion, elegance, wealth and gorgeousness.

High-quality wall coverings also have the functions of thermal insulation, energy saving and high efficiency. They can block the severe cold outdoors in winter and insulate the intrusion of heat waves in summer, achieving the effect of keeping warm in winter and cool in summer, thus greatly improving the performance of the wall. The overall quality of the surface saves overall heating and air conditioning costs.

Franchise consultation hotline: 15005922013

Product advantages wall covering renderings (1), no harmful volatile chemical components, superior environmental performance, the selection of wood fibers and natural fibers combined with scientific technology method to remove harmful chemicals and fully ensure human health and safety.

(2) It does not crack or fall off. The fibrous tissue has elasticity and breathability functions, making it integrated with the wall.

(3) Choose any individual color and three-dimensional relief to change the flat effect of traditional paint, and the relief texture is soft and friendly.

(4) Convenient and pollution-free construction. The method is simple and can be formed in one go. There is no need to polish the wall, effectively avoiding dust, noise and spillage.

(5) Easy repair: shovel off the stained wall covering when it is soaked, and roll-coat the shoveled part with new material, and it can be integrated with the original wall covering without any gaps. trace.

(6) Easy to update. As long as the original wall surface is clean, flat, white on the bottom, and has good waterproofness, the wall covering can be directly constructed without any special treatment to update the decoration. .

(7) Plant characteristics respire to regulate indoor humidity and temperature. The unique permeability of the fiber tissue enables the wall covering to breathe, absorbing moisture in the air in a timely and balanced manner, automatically adjusting the humidity, and preventing condensation when it is cold. .

(8) Natural and effective sound-absorbing dried wall coverings have an uneven and embossed three-dimensional surface, which is conducive to sound diffusion and weakens the penetration of sound outside the wall. The sound is reflected and has no echo, providing people with a A more peaceful living and working space.

Scope of application: Wall coverings are widely used in hotels of all levels, fashionable KTVs, high-end clubs, offices, private villas, town residences, old house renovations, and new house decorations, fully satisfying modern people's desire for green homes and individuality. The pursuit of transforming life.

Wall coverings are an upgrade in home beautification. Wall decorations that are green, environmentally friendly, warm, fashionable, and show individuality have become a new standard for people to choose to live.

Construction Steps Wall Clothing Rendering 1. Construction Points 1. The construction method of this product is roller coating. The roller coating tools used must be dedicated roller brushes. If other tools are used for construction, it will be difficult to achieve the application of this product. Some effects.

2. The construction of this product should be the last step in the entire decoration process. This work can only be carried out after the construction of doors, windows, floors, corner lines, air conditioning duct holes and even electrical switches and sockets is completed. Product construction.

2. Preparation 1. Pour the product in the packaging bag into a clean and large enough plastic container.

2. According to the instructions on the packaging bag, add an appropriate amount of warm water (the water temperature is preferably 20℃-40℃), and stir thoroughly.

3. Please use clean tap water to avoid contamination.

4. The mixed product should be left for 1 hour before use. Early use will reduce the bonding strength and construction fluidity of the product.

Please stir thoroughly again before use to ensure even mixing and no lumps.

3. Roller coating 1. Stick the mixture to the wall with your hands or a plastic spatula, then spread it, and then use a special roller to evenly apply it (the thickness is about 1-2 mm).

After drying, if you find that there are still uneven or exposed walls, spray some warm water, then add the mixed product, and roll it flat.

For small wall exposures, spray them with warm water and then press them directly with a roller brush to make up for the exposure without adding new materials.

2. When applying the roller for the last time, the direction of the roller brush must be in the same direction. Unordered roller coating will make the texture of this product appear messy, and under the action of light refraction, it will produce The visual effect of uneven overall color on the wall.

3. For the inner and outer corners of the wall, you can use a plastic scraper for scraping putty to shape it, and then use a roller brush to apply it gently.

IV. Other matters needing attention: 1. In order to ensure the consistency of wall drying, it is best to complete the construction of a room at one time on the same day.

2. The mixed product can be stored for a long time and usually will not change in quality within 48 hours.

If the products mixed on the same day are not finished and need to be used the next day, the mixed products should be covered with a wet towel that does not fade to prevent surface dryness or discoloration due to moisture evaporation.

3. It takes a certain amount of time for the product to dry completely after application. The construction site should be kept clean to prevent dust and garbage from contaminating the wall.

4. By accelerating the circulation of indoor air, the drying speed can be effectively increased to greatly reduce the chance of contamination of the wall surface.

5. For special occasions or special construction treatments during construction, please consult the dealer verbally.

Daily maintenance of wall coverings If the wall is accidentally stained, you can soak the stained area with warm water, peel it off after softening, and then re-apply it to the area.

Because of the pattern effect of the wall covering itself, there will be no color difference between the repainted part and the original wall.

Notes ① The construction method of wall covering is roller coating or scraping. The tool for roller coating must be our company's special roller brush; the tool used for scraping construction can be plastic on the market. Scraper, plastic or metal spatula.

Among the above two construction methods, roller coating has the best effect.

②The construction of wall coverings should be the last step in the entire decoration process. This product can only be installed after the doors, windows, floors, corner lines, air conditioning duct holes, and even electrical switches and sockets are all completed. construction.

Use environment: Do not use it in places with direct contact with water. It is generally not used in kitchens and bathrooms.

Under normal environmental conditions, the humidity of the air will not affect it.

If the ambient humidity is particularly high, wait until the surface of the wall covering is dry before applying waterproof material again.

Wall pretreatment Wall treatment is simple but important.

Wall covering is a water-based environmentally friendly product that takes 24-48 hours to dry.

In order to prevent some low-quality walls from seeping stains (such as efflorescence, crystallized salt, rust, etc.), new walls generally need to be painted with 1 Cover with putty and seal with white water-based primer. Unpainted wood or hardware surfaces must be sealed with white water-based primer.

New wall plank walls, wood plywood walls, wooden keel walls, and iron keel walls must be sealed with high-quality white water-based primer.

Old walls that have been painted with white glue paint can be used directly if the base surface is firm and clean and free of dust and loose materials.

Old wallpaper walls should be cleaned as much as possible and sealed with white water-based primer.

Moldy walls should be removed with a shovel and sanded to remove any traces of mildew, then brushed with appropriate mildew-washing water, washed with clean water in a timely manner, allowed to dry, and then sealed with white water-based primer.

To prevent water absorption and bubbling on the ceiling wall, it is advisable to use high-quality waterproof putty or water-based putty to treat the ceiling wall.

The material mixing should be dry to facilitate construction.

Mixing and Stirring Place the wall covering into a clean, large enough plastic container.

Add appropriate amount of tap water according to the instructions on the packaging bag and mix thoroughly.

Please use clean water without iron or other impurities to avoid contamination.

After mixing, it should be left for a while before use. Please stir again before use to ensure even mixing and no lumps.

Construction Suggestions: It is generally recommended to complete the construction of a single wall at once on the same day.

Roller coating construction generally requires the wall surface to be clean, strong, and dry, and the bottom surface must be white.

Wall coverings take a certain amount of time to dry, and the construction site should be kept clean to prevent dust and garbage from contaminating the wall.

Use a plastic scraper to close the edges after the material is on the wall but before it dries. The inner and outer corners should be closed smoothly at one time.

After the wall is dry, the edge closing effect will be worse and more difficult.

At this time, spray warm water until it is saturated before closing the edges.

The treatment of yin and yang angles and edge closing are the keys to the construction effect of the product.

Before construction, try to ensure that the lines of the wall structure are straight and smooth.

If the frame structure itself is distorted, it is best to level it when applying putty.

The factor is affected by the flatness of the bottom surface.

The flatter it is, the less material it saves.

Affected by the technical proficiency of construction personnel.

It is best to spread the product as thinly as possible without revealing the bottom.

If the product is not fully stirred evenly, materials will be consumed to form lumps.

Affected by the construction site.

The Yin and Yang corners consume more materials.

Affected by the quality of the roller.

Rollers specially supplied by wall covering manufacturers should be used for construction.

There are many wall clothing brands to choose from. How to choose high-quality wall clothing among the many wall clothing brands has given many consumers a headache. Today, the editor will give you some tips.

1. Smell the smell of the mixed wall covering products. High-quality wall coverings should have a light woody fragrance, without any irritating smell, odor or dust. 2. Pay attention to observation with your eyes. High-quality wall coverings Wall covering, soft color, uniform material, no particles, no agglomerations, no impurities.

3. Give it a try, pay special attention to the feel of the wall clothes when mixing. It should be delicate, even and smooth, absorb water quickly, be soft to the touch, not hurt your hands, not thick or hard, add water It can be applied after stirring for 5-10 minutes; the materials are evenly blended during hands-on application, easy to roll and apply, and it sticks as soon as it is applied.