Question 2: What industry does sheet metal processing belong to?
Question 3: What industry should sheet metal belong to? Hardware processing industry?
Question 4: What auto repair belongs to the work scope of sheet metal workers? Main processes of sheet metal processing: The main processes of sheet metal processing can be roughly divided into:
1: body disassembly and assembly
2. Body correction
3. Body maintenance
And each different process can be subdivided into several processes. In-depth explanation, we must mention two concepts.
1: automobile type of work
2. Body
1: The automobile maintenance industry can be basically divided into mechanical repairmen, electrical repairmen, sheet metal repairmen and painting repairmen, and other accessories, but the beauty and special maintenance industries are not included.
For the division of automobile body, it means to remove the whole circuit computer system, the whole engine-driven brake steering system and paint. Then all that's left is the body.
2. Body assembly (this is a general term for accessories) includes: body sheet metal parts (metal parts), car glass, car lights, interior and exterior decorative parts and handles, seats and accessories, car lock mechanism, window sealing and lifting mechanism, doors and front and rear sail covers. That is to say, when your car has broken glass, broken door locks, damaged decorative parts and other problems, remember that you are looking for automotive sheet metal instead of other jobs!
Because the car is a high-precision whole. Moreover, electrical accessories and mechanical accessories should be attached to the corresponding positions of the car body with high precision and low error. Even the straightness and curvature of car paint (which greatly affects the beauty of car body) are highly dependent on the error value of car body sheet metal. Therefore, sheet metal body and its repair have become a purely manual work in the automobile industry without hard standards, automatic tools and intuitive teaching.
In short, automotive sheet metal is to completely repair the broken and damaged car body!
A detailed description of the sheet metal worker's workflow (for example, a car that crashed and caused a rollover accident)
1: Dismantle the whole vehicle (remove all possible sheet metal parts or parts to be painted).
2. Body repair (replacement, stretching, welding, etc. Iron plate sag, beam bending, spatial displacement and other injuries caused by impact or overturning).
3. Repair of sheet metal parts (all damaged sheet metal parts that should be repaired should be bonded and welded to restore their appearance and size).
4. Yan Xiu of sheet metal parts (resetting repaired sheet metal parts, such as car door lights, displaced mechanical appliances and other non-sheet metal parts requires superb skills and unremitting patience to achieve accurate and beautiful installation).
5. Vehicle installation (after painting, install and fix all sheet metal parts and test all movable sheet metal parts).
6: End of delivery
Question 5: What is the occupation of a sheet metal worker in a 4 S shop? Automobile repair industry, also known as automobile plastic surgery,
Question 6: What does the sheet metal tool body do? Sheet metal workers mainly use the plasticity of materials to form various fixed parts (including blanking and shape correction) through cold pressing. Grasping the "receiving" and "releasing" of sheet metal is the basis of sheet metal making. Sheet metal is easy first, then difficult, easy to use and not easy to level again. At present, making money from sheet metal is still considerable.
Question 7: What is the prospect of sheet metal industry? If you are talking about automotive sheet metal, after all, there are so many cars, and there will definitely be a big market for future maintenance.
Question 8: What is automotive sheet metal's major in Vocational and Technical College? Judging the quality of an automobile maintenance school can be considered from the following four aspects:
Look at the brand
At least it must be a regular school with relevant qualifications, and it is best to have strong funds and guaranteed teaching equipment. In fact, private colleges have more advantages than public ones, and the curriculum design of private schools is closer to the market demand.
Second, look at training.
Of course, the most important thing to learn auto repair technology is the training class. If you only have theory, you can't repair cars, wash cars and wax. Which company will want you? Therefore, training is very important. The proportion of training courses is higher than that of theoretical courses, but it does not mean that all training is the best. Only by combining theoretical training can the learning effect be maximized.
Third, look at management.
Whether an automobile maintenance school is good or not depends not only on whether you can learn skills, but also on whether you can improve your personal quality. Only with good personal qualities and superb skills can there be long-term development in social work.
Sikan equipment
If the equipment we learn technology is still in the 1990s/2000s, then the technology you learn is out of touch with the society, so the equipment update of an automobile maintenance school should keep pace with the market.
Question 9: What is the prospect of sheet metal industry? With the continuous improvement of car ownership in China, automotive sheet metal, as an important project of car maintenance, occupies an increasing proportion in the after-sales market, with broad market prospects. At present, the number of professional repair shops is still very small, and it is common that roadside shops cannot meet the increasingly high maintenance requirements. The requirements for the quality of sheet metal maintenance are getting higher and higher, and the requirements for the quality of personnel, maintenance technology and maintenance equipment are also getting higher and higher, especially for the maintenance of accident vehicles. At present, the technical training of maintenance personnel is still very traditional, and vocational training has developed in recent years, but it still needs to be improved. Maintenance equipment mainly includes welding machine, molding machine, ground gossip, main beam corrector and chassis measuring instrument. Great progress has been made in localization, but high-end equipment still depends on imports. Italy GLOBALJIG is the earliest manufacturer to develop, design and produce beam calibrators. Its beam calibrator adopts modular design, and its three-dimensional data ensures the maintenance accuracy to millimeters. It has been designated as its special maintenance equipment by many automobile manufacturers.
Question 10: What does sheet metal design mainly do? 1. Sheet metal is a very extensive technology, and common products, such as automobile shells and computer cases, are all sheet metal products. The processing of sheet metal is to use a thin plate with the same thickness to achieve the structure you want through deformation, bending and bending. Rough machining with cold stamping tools is the most common (stamping, bending, welding and other processes).
2. Sheet metal design mainly depends on the product. More manufacturers will be elevator parts, chassis cabinets, stainless steel kitchenware, casings of electronic companies, metal parts, automotive sheet metal, air conditioners, and metal casings of electrical appliances. It seems that there is no such course in universities at present, but there are still training institutions. As a relatively new processing type, from the shallow to the deep, according to the different process of the product, the mold is also different.
To do this, the most important thing is to be familiar with the sheet metal process. It is best to go to the workshop to familiarize yourself with the technology for half a year before you can engage in design.