Measure the ring size. How to measure the ring size?
The measurement method is as follows:
① Wrap the silk thread around your finger first, then cut it straight, measure the length of the silk thread with a ruler, and then compare it (for example, the length of the silk thread around your finger is 53MM, so your finger size is 12).
② Measure the inner diameter of the ring directly with a suitable ring, and compare it with the following size to determine the size (note that it is the inner diameter, excluding the thickness of the ring) (for example, if the measured inner diameter is 17MM, then your hand size is 13).
If it is convenient, you can go directly to the jewelry store to measure your hands.
Matters needing attention in measuring ring size
① Rings are usually worn on the index finger, middle finger or ring finger, and the number of rings worn by most girls is 10- 15, among which 12 and 13 are more; The number of rings worn by most boys is 17-22, of which 18-20 is more;
(2) Because the finger joint is slightly larger than the place where the finger wears the ring, the line cannot be wound too tightly;
③ When measuring the hand inch, please ensure that it can smoothly slide over the finger joints; If you feel too loose after wearing the ring, you can wrap a few circles of thin, red or silk thread around the inside of the ring. If it is too tight, you can apply moisturizing oil or soapy water on your fingers, so that you can put it on or take it off smoothly.
When buying a ring in winter, because of the cold weather, your fingers are one to a half sizes thinner than in summer. If you want to get a more exact size, you can measure it at the end of the day, because the finger size is the largest at this time.
How to measure the ring size?
First of all, we should understand that the size of the ring refers to the size standard of the ring finger ring.
The hand inch is based on the number, and the hand inch of the Oriental ranges from the number 8 to the number 28. Hand inch can be divided into American style and Hong Kong style. The difference between them lies in the corresponding diameter and circumference. At present, Hong Kong-style method is widely used in China.
The hand size of modern people is between 4 and 26. According to the principle of thermal expansion and contraction, it is better to wear it near the finger in summer and not to fall off in winter. If the size of the ring you buy is not suitable, you can usually send it back for modification, and only need a small modification fee. If you use darry ring true love ring, they can give you a free modification for life.
How to measure the size of a ring
The "comparison table" and "detailed explanation" of the national standard ring size;
Ring size comparison table refers to the standard of ring size, called hand inch. Modern hand inches are represented by "numbers", and the size of Oriental hands ranges from 8 to 28. When buying a ring by hand, it is advisable to wear it slightly in summer and not to fall off in winter.
When wearing a ring, if you feel too loose, you can wrap a few red lines or silk threads around the finger wheel of the ring. If it feels too tight, you can put some soap on your fingers, take it off or put it on. If it is 18K platinum inlay, it needs to be adjusted to a suitable size. You can personally go to the gold shop to modify the hand storage.
Sorting basis: Numbers (port codes) refer to inner diameter (mm) and circumference (mm).
7 - 14.5 - 46 8 - 15. 1 - 47.5
9 - 15.3 - 48 10 - 16. 1 - 50.5
1 1 - 16.6 - 52 12 - 16.9 - 53
13 - 17.0 - 53.5 14 - 17.7 - 55.5
15 - 18.0 - 56.5 16 - 18.2 - 57
17 - 18.3 - 57.5 18 - 18.5 - 58
19 - 18.8 - 59 20 - 19.4 - 6 1
2 1 - 19.7 - 62 22 - 20.2 - 63
24 - 2 1.0 - 66
The number of rings worn by most girls is 10- 15, among which 12 and 13 are more; The number of rings worn by most boys is 17-22, of which 18-20 is more. You can compare your circumference, number and the diameter of your ring to convert.
How do you know what size ring you are wearing? How to measure?
Find a wool, wrap it around your finger, mark it with a pen, and then take it down and measure it.
Hand inch refers to the size of the ring. Make sure your finger size before buying. The ring is more comfortable to wear. How to measure your hand?
Method 1:
1. Prepare a ring measuring card printed on A4 paper.
2. Make a preliminary judgment on your corresponding hand. Select a circle, fold it in half along the dotted line in the middle and cut it open. Then put the cut circle on a piece of hard box paper, draw the boundary line with a pencil, and then use a knife to describe the circle.
3. After cutting, a self-made ring measuring card is completed. If it doesn't fit, try cutting it again, and you can easily find the most suitable ring.
Method 2:
1. Wrap the silk thread around your finger first.
2. Cut and straighten the silk thread, and measure the length of the silk thread with a ruler.
3. Then check the cross-reference table and find the right one.
The finger size of modern people is generally between 4 and 26. When choosing a ring by hand, it is advisable to wear it slightly in summer and not to fall off in winter. When wearing a ring, if it feels too loose, you can wrap a few red lines or silk threads around the ring. If it feels too tight, you can apply some moisturizing oil or soap to your fingers, so that you can put it on and take it off smoothly.
When measuring the ring size, please pay attention to the details:
1. To get a more accurate size, you can measure it at 19:00-2 1:00.
Don't measure your fingers when the weather is too cold, because the size of your fingers is the smallest at this time.
3. When the specific size cannot be determined, you can choose a larger size (half size or 1 size).
4. Adjust the number of rings according to different seasons. Winter is one to half thinner than summer. When buying, it is advisable to take it back and forth but it is not easy to fall off. In summer, it is advisable to take it back and feel a little tight.
5. The number of rings worn by most girls is 10- 15, among which 12 and 13 are more. The number of rings worn by most boys is 17-22, of which 18-20 is more.
How to measure the size of a ring? Are there many different ring size comparison tables? -
To measure the ring size, you can wrap an inelastic rope or a piece of paper around the ring finger, measure the circumference of the ring finger, and then know the size of your hand according to the ring size comparison table.
Just pay attention to your own measurement may have errors, so be sure to measure more times. There are indeed several different versions of the ring size comparison table, so when buying a ring, you must first know what kind of ring size comparison table is used in the jewelry store you choose, and then know the size of your hand according to the circumference of your ring finger.
Of course, in addition, if you choose a DR diamond ring that can only be customized for a lifetime, which means the only true love in your life, then the person I want to accept will be very happy and moved.
How to measure the finger ring size?
Steps and methods:
1. With iron wire, cotton thread or paper strip, take the paper strip as an example, draw a circle around the finger part where you want to wear the ring, make a small mark after ensuring that the size of the circle is moderate, then unfold the circle into a straight line and measure its length to get the circumference of the required ring.
Precautions:
? The measurement of cotton thread is prone to errors, and the measurement of iron wire and paper strip is basically accurate.
? The difference between the two adjacent numbers is only a few tenths of a millimeter, and my fingers are soft. In fact, the actual wearing effect of adjacent numbers is not much different.
? When measuring, please do not measure directly along the finger root, but make a circle and adjust the size repeatedly to ensure that the finger can pass smoothly. Because knuckles are generally thicker than heels, the amount of light along the roots of fingers will be smaller.
? Hand inch, that is, the standard of ring finger size, is expressed by how many numbers. Generally speaking, American and Hong Kong styles have different diameters and perimeters. At present, Hong Kong style is widely used in China.
? The size of the hand inch is generally between 4 and 26. When choosing a hand inch, wear a ring in summer and turn it around in winter without falling off.
Answer finished, welcome to adopt.
Ring size comparison table
Number (port code) Diameter (mm) Perimeter (mm)
7 - 14.5 - 46
8 - 15. 1 - 47.5
9 - 15.3 - 48
10 - 16. 1 - 50.5
1 1 - 16.6 - 52
12 - 16.9 - 53
13 - 17.0 - 53.5
14 - 17.7 - 55.5
15 - 18.0 - 56.5
16 - 18.2 - 57
17 - 18.3 - 57.5
18 - 18.5 - 58
19 - 18.8 - 59
20 - 19.4 - 6 1
2 1 - 19.7 - 62
22 - 20.2 - 63.5
23 - 20.4 - 64
24 - 2 1.0 - 66
In fact, if you really want to know your girlfriend's finger size accurately, you will only know it accurately if she tries it in the jewelry store herself. Other methods will be biased anyway. However, this is secondary. As long as your girlfriend knows and thinks that you really like her and really want to marry her, she will be happy all her life. Wearing a DR true love ring that needs to be customized by a man with his ID card can only be customized once in his life. With the romantic meaning of "the only true love in his life", prove to her that she is the love of your life. Then I think since the size of the ring is really a little inappropriate, she shouldn't mind.