How to knit the bracelet loosely?
1. Expansion buttons are generally used to adjust the thickness. There should be two ropes (gray) as shafts. Because of the illustration, I used a thick rope to see more clearly, so I only took one.
2. Put the red rope under the gray rope of the intermediate shaft. Press the right rope under the left rope. The left rope passes under the gray rope of the middle shaft and is tied into the circle of the right rope. Tighten it and a small bag will come out on the left.
3. Put the left rope under the right rope. The right rope passes under the gray rope of the middle shaft and plunges into the circle of the left rope. Tighten it, and a small bag will come out on the right.
4. Repeat the above steps several times, and the telescopic buckle will come out. Generally woven with nylon rope, cut it after weaving, light it with a lighter and press it tightly.
Weaving steps for loosening and fastening bracelets
1. Prepare two 30cm ropes, one end of which is lit with a lighter at both ends of the rope, and twisted into a pointed shape with your fingers, so that smaller beads can be easily inserted. Wear beads as shown below and leave a proper distance.
2. Wrap the rope as shown in the figure below, and then tighten both ends of the rope.
3. The effect after tensioning.
4. Wrap the rope as shown.
5. Then wind it like this, and then tighten both ends of the rope head, not too tight, otherwise it will be more difficult to take the bracelet back and forth. Boys have strong hands, so girls won't have this phenomenon.
6. Start winding the rope from the left and then tighten it.
7. Wrap the rope around the right side as shown in the figure.
8. Put on the rope, and then pull both ends of the rope to both sides.
9. Repeat this action with the rope on the left.
10. The rope on the right also repeats this action.
1 1. Go back and forth several times and that's it. Be sure to remember the order, left-right-left-right, otherwise the appearance will be ugly. Generally speaking, the knotted knots are above 1 cm, and they are too long and too short to look good.
How to choose bracelets?
material
The materials for making bracelets are very rich, and each material has its own unique luster and texture. You should choose materials according to your own needs and conditions. Under normal circumstances, bracelets made of gold, platinum and silver are easy to match with wedding dresses.
measure
The wrist is a fragile part of the body. With the movement of hands, it is easy to guide others' sight, attract attention, and affect others' impression of you at the same time. The length of the bracelet is about 20-25 cm, and you should also master the size when wearing it. Too tight, it will affect the beauty and comfort; It's too loose, and it will slip into your hand again. Therefore, the length of the bracelet is generally better to leave a finger gap between the chain and the wrist after being worn on the wrist.
Common types of bracelets
1, diamond
Diamond bracelets are bracelets made of diamonds and other precious metals. The popularity of diamonds has promoted the popularity of diamond bracelets. Bright diamond bracelets have become the focus of design by major jewelers. Diamond bracelets have no other functions except beauty.
2. Gems
Sapphire, with its crystal-clear and beautiful color, was covered with mysterious and supernatural colors by the ancients and regarded as an auspicious thing. As early as ancient Egypt, ancient Greece and Rome, it was used to decorate mosques, churches and monasteries and as a tribute to religious ceremonies. Together with diamonds and pearls, it has also become an indispensable ornament on the crowns and dresses of the kings of the British Empire and the czars of Russia. Sapphire has been one of the top five gemstones in the world and a precious gemstone variety since it entered the people's society in the last hundred years.
3. Crystal
According to the seven-wheel rule of David's Sanfa Palace, crystals are basically divided into two types: radioactive crystals and absorptive crystals. Radioactive crystals are high-frequency crystals, which can radiate energy to attract and fight for some magnetic fields. For example, the green ghost related to career, amethyst in charge of money and the backbone crystal related to health are all radioactive crystals, which should be worn on the right hand. As for the absorption crystal, it is low frequency, and its function is to absorb and condense some energy. For example, a pink crystal related to love should be worn on the left hand. Obsidian, blocking right and wrong, should be worn on the right hand.
4. Emerald
Bracelets have become the symbol of fashion and the focus of pursuing trends, while jade bracelets are gorgeous but not vulgar, noble and elegant, which can better highlight the wearer's extraordinary temperament and pursuit of life taste. In particular, the natural green jade bracelet of the old pit ice species in Myanmar is a platinum jade bracelet selected from the old pit ice species, which is the best.