As long as the car has been repaired by shaping, cutting and welding. , is an accident car. When repairing, if you just knock and pull on the bench, it is not an accident car. Therefore, if the back panel is damaged, use sheet metal to repair it, and try not to cut it. Once cut, it is an accident car.

Although sheet metal repair is not an accident car, it has little influence on the later car sale, and it should be analyzed according to the actual situation. If the damage is serious, it must be cut and repaired. Because safety comes first.

Consequences of automobile side wall cutting

The side wall is usually composed of side wall outer plate, side wall inner plate, A-pillar inner plate, A-pillar reinforcing plate, B-pillar reinforcing plate, oil filler cap and rear shock absorber mounting seat.

If the steel parts are deformed, it is often troublesome to restore the sheet metal, so it is normal to cut and weld new parts. As long as you follow the corresponding process quality requirements, you can also ensure safety. High-quality welding can also ensure strength, and local reinforcement can also meet the requirements when necessary.