Many small parts are still allowed, as follows. These parts are not easy to be found by inspectors. Even if the computer checked, the original factory did not write down the model parameters of these parts in detail, and the computer could not find them.
1, performance
Replace high-grade spark plugs (NGK made by Nissan), regular and qualified xenon headlights (non-colored), aluminum alloy clutch brake horns with breaking and bending resistance, explosion-proof and oil-leaking brake pipes, aluminum alloy brake oil pots, high-performance and wear-resistant brake pads, etc. , handlebars, handlebar balance terminals and CNC aluminum alloy keycaps that are not much different from the original factory.
Step 2 show up
Motorcycle handlebar guard, license plate frame (license plate frame can not block license plate) and decorative lights, less obvious small stickers (fuel tank stickers, etc.). ) and replace the rearview mirror with aluminum alloy (but the size should not be too large).
Step 3 color
Although you can register to change the appearance color of film painting, it depends on the inspector's mood. Generally speaking, colors should not be too gorgeous or exaggerated, and too many colors should not be mixed. It is best to use solid color to change the registration.
The process is as follows: find a place to change the color, make out an invoice, go to the vehicle management office for filing within 10 days, bring the green paper, driving license, ID card and spray-painted film invoice, and then go through the change registration within 1 hour according to the process.
Finally, to sum up, the scope of motorcycle modification is very small, except for some inconspicuous, driving license photos can not be seen, original factory parameters can not be written clearly, and other parts can not be changed.
Scope of illegal modification:
Illegal motor vehicle modification refers to the modification of the appearance, power system, transmission system and braking system of the vehicle beyond the design standard of the original vehicle, which is not allowed by national laws and has not been approved by the manufacturer, including the replacement of key parts.
1, vehicle appearance
The appearance mentioned here is mainly the installation of side boxes, tail boxes, anti-falling frames (super-wide internal species) and over-high flag frames. , are not allowed to exceed the width and height of the original car. (Mobile phone stands and the like are generally ignored, but there are also inspectors. It's hard for you when the police are in a bad mood. ) Replace the original headlights, use a laser gun (brighter than the headlights of a large truck) as the turn signal, which is similar to the flashing light of a police car, and change the position of the rearview mirror or not install it. Fuel tank deformation (special fuel tank for stunt, fuel tank that can be stepped on.
2. Power system
Replace the engine (single cylinder to double cylinder, 150CC to 250CC, etc. ), change the carburetor to EFI and modify the exhaust (make the exhaust sound louder). Exhaust modeling is too exaggerated (too thick and too big), the color is too bright (too bright, coquettish powder, etc. ).
3. Transmission system
Change the transmission mode (chain to belt transmission), replace the toothed plate with an oversized toothed plate (the large toothed plate is suitable for special effects, and it is easier to raise the head), replace the widened and lengthened flat fork (widening can change the thick tire, and lengthening is suitable for linear acceleration), and replace the tire larger than the original factory (150 changed to 180 wide tire).
4. Brake system
Replace the calipers, install ABS, and install the electronic auxiliary system (affecting the circuit), and the calipers will be changed from one to multiple (3-4 calipers are installed at the back of the stunt car for better braking and safer tire burning).
5. Others
Replace the horn (such as snail horn, increase the decibel of whistle, simulate special sound, such as siren). Replace the hub or change the color of the hub.