Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and medical aesthetics - Subject 2 corner skill formula
Subject 2 corner skill formula
Subject 2: The formula of S-corner skill is as follows:

1, make full use of all available resources, including the coach mirror (two small round mirrors added on the hood), the rear-view mirror hatch reinforcement, your head (learn to stretch out to see the distance) and so on.

2. Step on the clutch before entering the corner and control the speed at a very slow level, which will help you look up and find the prompt point, and you can also use this time to quickly pass the action essentials.

3. After entering the corner (taking the left S-bend as an example), look at the reinforcement on the left side of the front of the car. When the front end of the left tendon touches the yellow line outside the S-bend, it is necessary to hit the direction. The key is to gesture quickly and drive slowly.

4. When the car body is relatively straight, it is necessary to look back at the reinforcement. When the front end of the left rib is about to cover the outer yellow line, there will be no angle for tire return. Basically, if you go back in the right direction, the hood will cover a little yellow line. Remember that the speed is still slow.

5. When you come back, look at the rebar on the right. When the right tendon touches the outer yellow line, turn right for a quarter of an hour. Then look at the coach mirrors on both sides. Where is the general direction? Where is the small direction? Control the speed at any time.

6. After turning, almost one third of the car body can return to the steering wheel. If there is a curve ahead, don't bump into it immediately, because the inner wheel difference may hit the yellow line at the last minute, but the examination room is usually very large. After going out, it will be a straight line. Some driving schools are small in scale and will turn around immediately.

Extended data:

Subject 2 Operation Skills

1, first gear idling, no gas.

2. Before entering the right-angle curve, keep the car as far away from the protruding points in the lines on both sides of the road as possible.

3. When the center of the small triangular window near the protruding point on the front window coincides with the protruding point, turn the steering wheel to the side of the protruding point to the end. When the front of the car turns to a new direction, pay special attention to the right front wheel not to press on the right side of the road.

4. Try to stick to the right line when turning at right angles.

When you see the front of the car aiming at the exit, you will quickly return to the right direction.

6. Pay attention to the inner wheel difference, correctly estimate the trajectory of the inner rear wheel, do not press the inner right-angle bump and sideline, and do not stop or reverse.

Baidu encyclopedia-subject 2 exam