The working structure of forklift truck is composed of pin shaft and pull rod of each part. The position of each pin plays a decisive role in actual operation. General earthwork is to put a bucket to complete the homework. Even if there is high terrain, the inclination angle of the bucket will not be too large. The new car can easily level the bucket, mainly because there is not much wear between each pin shaft and pin sleeve, so there is no gap.
Simply put, it is to completely loosen the bucket, and then adjust the angle of the bucket you want after the teeth touch the road, that is, walk directly to lower the road. When the height changes little, only the boom joystick can be used as far as possible to adjust the height of the bucket to be shoveled. If the height of the road surface is adjusted with a bucket, the error will increase, because the gap between the bucket pins is directly related to the adjustment of the bucket.
If you directly adjust the bucket when driving to work, the bucket will be much more than you expected, and it is easy to shovel the road when the bucket is loose, so it is difficult to reach the road height you expected.