Chamomile, fine black tea and rose seeds are soaked in appropriate amount of boiling water, dried to the extent that they will not burn the skin, and then the residue is taken out and evenly applied to the eye bags 15 minutes to several hours. Or use heated castor oil or olive oil.
Soak the cleaned papaya block in boiling water with mint. When the temperature is moderate, drink the tea and apply the residue to the eye bags.
Choose the eye cream that suits you. How about Yunrongji hazel essence cream with eye bags removed? Not bad, just wash your face with water and apply it to your eyes.
?
If tea becomes overnight tea, don't spill it in a hurry. You can apply a small amount around your eyes by hand or cotton swab, close your eyes for a while and then wash it off. It can also improve dark circles and bags under the eyes. However, the teahouse has been put on hold for several days, so it should not be used.
② The damage of the first-level and second-level caches inside the CPU is a common failure of the CPU. Slightly damaged ones can still be started, and can enter the normal desktop for normal operation. When running some software with high I/O throughput (media playing, games, plane /3D drawing), it will restart or crash.
Solution: Shield the second-level cache (L2) or the first-level cache (L 1) in CMOS, or replace the CPU to eliminate it.
4. Automatic restart caused by 4. AGP graphics card and PCI card (network card, cat)
① The nonstandard or poor quality of the external card leads to the failure of the reset signal of the AGP/PCI bus, which leads to the system restart.
(2) There is a situation that the system restarts due to the looseness of the graphics card and the network card.
5. When connecting to a faulty or incompatible external device, the parallel port, serial port and USB interface will automatically restart.
① Peripheral failure or incompatibility, such as printer parallel port damage, one pin short circuit to ground, USB device short circuit to ground, pin definition and signal level incompatibility, etc.
② The jitter of external equipment is too large when it is hot-plugged, resulting in instantaneous short circuit of signal or power supply.
6. The internal circuit or chip of the optical drive is damaged.
The optical drive is damaged, and most of them can't be read/engraved. There is also a sudden restart of the host due to internal circuit or chip damage during work. The CD-ROM drive itself is poorly designed, and there is a Bug in FireWare. It also causes a reboot when reading the disc.
7. The reset switch problem on the front panel of the chassis.
The reset key on the front panel of the chassis is actually a normally open switch, and the reset signal on the motherboard is a +5V level signal, which is connected to the reset switch. When the switch is closed, the +5V level is grounded, and the signal level drops to 0V, which triggers the system to reset and restart, and the reset switch returns to the normally open position, at which time the reset signal returns to the +5V level. If the reset key is damaged, the switch is always in the closed position, and the reset signal is always 0V, the system will not be able to power on for self-test. When the elasticity of the reset switch is weakened and the button is not easy to bounce when pressed, the switch will be easily closed with a slight vibration. Resulting in a system reset and restart.
Solution: Replace the reset switch.
There is also a short circuit in the reset switch lead in the chassis, which leads to the automatic restart of the host.
8. Motherboard failure
It is rare for the motherboard to cause an automatic restart. Generally, the circuit related to reset is faulty; Socket and slot have virtual welding and poor contact; Individual chips, capacitors and other components are damaged.
Third, other reasons.
1. The power supply voltage is unstable.
① The working voltage range of computer switching power supply is generally 170V-240V. When the power supply voltage is lower than 170V, the computer will automatically restart or shut down.
Solution: add voltage regulator (not UPS) or 130-260 V wide switching power supply.
(2) If high-power appliances such as computers, air conditioners and refrigerators use patch panels, when these appliances are started, the voltage supplied to computers will be greatly affected, which is often manifested in system restart.
The solution is to separate their power cords.
2. Strong magnetic interference
Don't underestimate electromagnetic interference. Many times, our computer crashes and restarts are also caused by interference. These interferences come from CPU fans, chassis fans, graphics cards, motherboards and hard disks inside the chassis, as well as external power cords, inverter air conditioners and even large equipment such as automobiles. If our host has poor interference performance or poor shielding, the host will restart unexpectedly or crash frequently.
3. Incorrect connection of AC power cord.
Some users directly ground the zero line of the power supply line (not the zero line of the electric energy meter), which leads to automatic restart, because the interference signal is introduced from the ground line.
4. The plug-in or power socket is of poor quality and poor contact.
After the power socket is used for a period of time, the elasticity of the reed slowly loses, which leads to poor contact between the plug and the reed, constant change of resistance and fluctuation of current, and the system will naturally be unstable. Once the current fails to meet the minimum requirements for system operation, the computer will restart. The solution is to buy a good socket with qualified quality.
5. Too much dust causes the reset line of the motherboard to be short-circuited and automatically restarted.
Your situation should be caused by voltage instability. I suggest you buy a voltage regulator to solve this problem. Good luck!
10 Install a computer optimization software such as an optimization master or a super rabbit. The optimized computer will be much faster! !
1 1 The current system also takes up a lot of memory. If necessary, adding more memory will be much faster.
12 computer hard disk used for a long time will also slow down the computer. Re-partition installation can repair bad logic and the computer will be faster. The physical reading and writing speed of hard disk is slow, so you can only change it to a better one! ! !
Generally speaking, when the screen is inverted, you can try the following solutions:
1. You can rotate the screen from four aspects by using shortcut keys. The operation method is: Ctrl+Alt+ Arrow keys, and press three keys at the same time. Ctrl key of computer
+Alt+ the down arrow reverses, Ctrl+Alt+ the left arrow turns left, and Ctrl+Alt+ the right arrow turns right.
Ctrl+Alt+ up arrow is normal (generally applicable to Intel integrated graphics cards).
2. Right-click Desktop-Left-click Properties-Settings-Advanced-Graphic Options-Display Direction-Reverse 180- OK. (This method is suitable for discrete graphics cards, not integrated graphics cards).
3. Restart the computer to see if it can be solved. If it's still like that, change the monitor. If the fault is eliminated, it is the fault of the monitor. If it still fails, it is the problem of the graphics card driver. Reinstalling the graphics card driver can solve this problem.