Car beam calibration has the following effects on the car:

1. Even if the calibration is good, it cannot be calibrated to the level of a new car. On the contrary, if the calibration is not good, it will cause the car to accelerate and shake, and the worse it will be. The vibration becomes more severe at high speed, and the vehicle deviation is more obvious or even serious. It is recommended to drive with caution after repairs. Or replace it with a new one;

2. Body correction refers to the process of using certain external force to repair parts damaged by accidents or fatigue to the "state" of the technical standards when the vehicle leaves the factory. The word "state" contains two meanings;

3. "State" refers to a more intuitive appearance and shape, while "state" is a more abstract and deeper concept. For example, whether the internal molecular structure of the metal can be rearranged according to its original position, whether the internal stress is completely released, etc., will be directly related to the function and life of the vehicle after repair;

4. Structural parts refer to the The components on the car body that play the main supporting and load-bearing roles are the installation basis for body parts. They are commonly found in longitudinal beams, cross beams, door pillars, and side rails. This type of component usually has very high strength, and the structure is mostly a closed box-shaped section. Therefore, certain means and measures should be taken during repair, and reasonable techniques should be used for repair.

One million car purchase subsidies