First, grinding wheel cutting; This is the most widely used cutting method at present.

As the name implies, grinding wheels are used as cutting tools.

Cut stainless steel on and above.

It is also the cheapest way to cut.

But because a lot of burrs will be generated after cutting,

Therefore, the deburring process is needed in the later stage.

Some manufacturers have no requirements for burrs.

This method is the simplest and lowest cost method.

The second method is wire cutting, that is, let stainless steel capillary walk on the on-line cutting machine.

However, this method will lead to discoloration of the nozzle. In the case of strict manufacturers,

Need post-processing treatment, such as grinding.

The third method is metal circular saw cutting;

The product cut by this cutting method is very good,

Moreover, several pieces can be cut together with good efficiency.

But the disadvantage is that chips are easy to stick to tools,

Therefore, you must choose the saw blade very carefully.

The fourth method is to cut with a hob chip-free pipe cutter.

This cutting method has excellent incision and is the choice of many enterprises.

This method is not suitable for cutting stainless steel pipes with wave ratio.

It is very easy to tear and the nozzle will be deformed.

The above four cutting methods are the most common cutting methods for stainless steel pipes at present.

These cutting methods are also used for stainless steel capillaries.