Have you ever used an automatic noodle machine? What is an automatic noodle machine? This is a kind of equipment that can make noodles automatically, which is mainly used in some large noodle manufacturers. You can also use an automatic noodle machine at home, because many people don't have to make noodles by hand, and the noodles made are more nutritious and healthy than those outside. Now, let's take a look at the price range of the automatic noodle machine and learn about the production process.

First, the price of automatic noodle machine

The price of automatic noodle maker is generally between 100 yuan-1000 yuan.

Second, the process technology

1, dough mixing system

The equipment consists of a flour elevator, a flour conveyor, a brine mixer, a dough mixer and an electrical control cabinet. The transported flour and mixed brine are quantitatively controlled to form an atomized state, so that the green body is loose and dry and wet evenly.

2, pressure surface, cutting system

The curing machine, the compound machine, the calender, the cutting machine, the bar feeder and the strip picker are connected into a whole to complete the noodle forming stage. The prepared blank is cured within 10 minute, and the flour is stirred to fully absorb water and burst to form a wet gluten network, which is sent to a laminator to make two dough pieces at the same time, pressed into one piece, and then calendered by four-stage double rollers with a thickness of 0. 8~2 mm patch. Cut the pressed dough into 0.8~3 mm wet noodles according to different specifications with a slicing knife. Noodles cut into 2400-2600 mm in length are lifted to the parallel chain on the upper shelf by the automatic bar feeder.

3. Automatic shelf tail cutting device

It consists of lifting, rod loading, tail trimming and control cabinet. The wet noodles hung on the steel pole are lifted to the starting point of the drying room operation, and synchronously hung on the hanger of the mobile drying device under the control of the infrared integrated circuit. A tail cutter is installed at the starting point of pre-baking, and the cut dough can be recycled at any time. Because they are all cut into a certain length in advance and enter the drying process, the dry dough head is greatly reduced.

4. Drying system

It is composed of a drying drive, a steel wire rope, a chain suspension device, a steel structure cooling ceiling fan, a moisture exhaust fan, a steam heating pipe, a sensor, a temperature and humidity detection controller and an electrical control cabinet. The movable steel wire rope hanging adopts stepless speed regulation, and the dried noodles are transported to three drying areas at the speed of 10- 14 rods per minute. Cold air strips in 1 zone prevent noodles from stretching and surface drying quickly; Zone 2, moisturizing and sweating, is high temperature and high humidity drying, which realizes the internal moisture diffusion of vermicelli and controls the surface drying; 3 subarea cooling and heat dissipation, with the purpose of slow drying of finished products.

5. Remove the finished product system of the cutting plane.

It consists of a lower shelf machine, a forming machine, a slicer and a control cabinet. After 5 hours of drying, the linear dried noodles were taken down from the hook by the anchor chain, sent to the slicer, cut into 240 mm segments (the length can be adjusted), and packaged into beautiful and economical goods through 250 g and 500 g metering.

The above is the price introduction of automatic noodle machine. The automatic noodle machine is easy to operate and the operation method is simple. The automatic noodle machine can make delicious noodles in just a few simple steps. We can choose some vegetables and whole grains to make some noodles. Noodles are a good food, which can help digestion and is easy to digest. We can choose some automatic noodle machines suitable for home use and make them according to our own tastes.