Electronic and electrician courses:

First, basic courses

Moral education, Chinese, mathematics and application foundation, English, physics, computer application foundation, physical education, employment guidance.

Second, professional courses

1, mechanical drawing

Learn the basic knowledge and methods of engineering drawing, projection principle, view, sectional view, sectional view, part drawing, assembly drawing and axonometric drawing, so that students can draw simple part drawings and assembly drawings, and have the ability to read views and draw control engineering drawings.

2, electrician foundation

By studying the basic principles and laws of circuits, students can master the calculation and basic analysis methods of DC circuits, AC circuits and first-order dynamic circuits, understand the concepts of non-sinusoidal periodic current circuits, second-order dynamic circuits and the basic concepts of magnetic circuits, and can calculate simple magnetic circuits.

Understand the basic structure and principle of common electrical instruments. Make students master the use of DC and AC instruments. Can analyze the common troubleshooting methods of simple and commonly used electrical instruments, can use electrical instruments correctly, and cultivate students' ability to process data and solve practical problems.

3, analog electronic technology foundation

Learn the principles, characteristics and main parameters of basic electronic devices and basic amplifier circuits, the common analysis and design methods of amplifier circuits and feedback circuits, the structure, characteristics, technical indicators, basic connections and typical application circuits of integrated operational amplifiers, and understand the working principles of power amplifiers, sine wave oscillators and DC regulated power supplies. It lays a foundation for students to correctly analyze circuits and maintain instruments.

Through experiments, students can master the structure, working principle and usage of commonly used instruments and meters. Master the test methods of common electronic device characteristics and main parameters, and choose them reasonably. Have the ability of wiring, testing, fault analysis and experimental result analysis of general electronic circuits. Lay a solid foundation for learning computers and digital instruments.

4. Fundamentals of digital electronics technology

Learn the basic laws of common logic algebra, the composition and analysis methods of common gate circuits, combinational logic circuits, flip-flops and sequential circuits, and have preliminary design ability. Understand the pulse generation and shaping circuit, the basic principle of A/D and D/A conversion, and the external leads of typical integrated blocks.

5, electrician internal and electrical safety

Through learning, students can master the basic knowledge of electrical safety and understand the electrical wiring and construction methods.

6. Electronic instrument measurement

Through the study of this course, students can master the basic knowledge of common electrical and electronic instruments, and master their basic structure, working principle and measurement methods.

7, motor and electrical control

Through the teaching of this course, students can acquire the knowledge, basic theory and basic calculation ability of motor and electric drive, and receive the necessary basic skills training. Familiar with the basic knowledge of motor, understand the working principle of motor and analyze the common faults of motor.

Learn the structure, principle, specifications, models and uses of common control appliances, master the basic links of relay contactor control circuit, analyze and design general control circuit, and be familiar with the basic knowledge of the use, working principle, installation, debugging, operation and maintenance of general production machinery and electrical equipment. Understand the basic structure, working principle and working characteristics of transformers, AC, DC motors and control motors.

8. Electricians can read drawings.

Make students master the methods and principles of electrical drawing through learning; Common words and graphic symbols of electrical and electronic components; Can correctly read and draw the schematic diagram and installation diagram of electrician and electronic circuit.

9, electronic design automation

Through the teaching of this course, students are familiar with and master the use of a version of electronic circuit CAD and electronic circuit workbench software. Can use computer to draw circuit diagram and design corresponding printed circuit board.

10, Web page making and design

Make and design web pages by using common web page making software, complete personal web page making, and publish relevant information on the Internet.

1 1, power electronics technology

Understand the basic principle and main parameters of thyristor. Make students master the basic principle, waveform drawing, thyristor protection and parallel connection, thyristor trigger circuit of commonly used thyristor rectifier circuits and active inverter circuits, understand the basic principle, waveform analysis and main parameter influence of thyristor passive inverter and AC voltage regulating circuits, and have the ability to install and use general controllable rectifier equipment.

12, single chip microcomputer technology

Understand the characteristics, structure and working principle of each component of single chip microcomputer. Make students master the characteristics and composition of single chip microcomputer, the working principle of each part, the principle of microprocessor and memory, the method of exchanging information between CPU and peripherals, and the method of interrupting the process; Learn the input/output process, sampling principle, A/D and D/A application, and the use of common I/O interface chips; Learn assembly language and programming methods; The application and development of hardware system of single chip microcomputer are studied.

13, programmable controller

Learn the composition principle, hardware composition and working principle of each component of the programmable controller, and master the programming language and method of the commonly used programmable controller, so that students can carry out the preliminary design of the PLC system.

14, factory power supply

Through the study of this course, students will be familiar with the basic structure, working principle and function of each link of power distribution system and primary and secondary electrical equipment in factories, correctly analyze the primary and secondary wiring diagrams of power distribution systems in small and medium-sized factories, master the preliminary ability of calculating power load and short-circuit current, understand the electrical installation drawings, master the design methods and basic contents of workshop power distribution stations, distribution lines and electrical lighting, and have the basic knowledge of safe and economical electricity use.

15, sensor principle and application

This course mainly teaches the basic concepts and knowledge of detection and conversion technology. Through teaching, students can understand the basic structure, working principle and application of sensors, have the ability to select, test and adjust sensors, and understand the working principle of commonly used measuring circuits, detection devices, signal conversion, signal processing and related interface circuits and parameter stabilization methods in the detection system.

16.c programming

This course mainly uses C language to design simple programs, and some small programs can be edited simply by learning. It is a compulsory course for electronics majors.

Third, elective courses

1, marketing

Learn the basic knowledge of economic law so that students can understand economic contracts, trademarks, patents, ownership and foreign-related legal systems. Learn the basic knowledge of marketing, so that students can understand marketing strategies, methods and means of market research and prediction. Learn the basic knowledge of public relations, so that students can understand the functions and methods of public relations investigation, publicity, communication and some comprehensive public relations activities.

2, enterprise management

The enterprise management part of this course mainly introduces the organization, labor quota, plan management, quality management, cost and profit of the production process. The technical and economic part mainly introduces the principles and methods of technical and economic analysis, so that students can understand how to combine technology and economy organically, so as to have the basic ability of technical and economic analysis and comprehensive evaluation.

3. Introduction to environmental protection

Learn the basics of ecology and environmental protection. Make students understand the significance of ecological balance and environmental protection, as well as the principles and methods of three wastes treatment.

4、AUTOCAD 2000

Through the study of this course, students can understand modern design methods, master computer-aided design technology and the use of AutoCAD software packages, and master the knowledge of two-dimensional drawing, two-dimensional editing, three-dimensional surface model, three-dimensional editing coordinate system and so on. And obtain the corresponding national certificate.

5、VB6.0

Based on VisualBasic6.0, this course teaches the basic concepts, theories and programming methods of programming languages, so that students can understand and master visual computer programming methods, independently write application programs, and design and develop small and medium-sized systems in combination with related technologies such as databases and API functions.

Through the study of this course, students can master the functions of advanced language programming and visual programming, master the skills and techniques of visual programming, and lay the foundation for students to further learn Visual Basic programming by themselves.

6, chemical common sense

Learn the basic knowledge of chemistry; Understand the performance and application of common simple chemical production equipment; Understand the simple chemical production process. Make students understand the causes of corrosion and protective measures.

Internship content:

(1) Metalworking Practice

Learn the basic operation of locksmith and understand the basic knowledge of metalworking; By making small workpieces and learning to use tools and measuring tools commonly used by locksmiths, students can understand the methods and processes of machining.

(2) Internal and external line electrician practice

Learn the selection of common lamps, the installation and maintenance of lighting circuits, and the correct use of electrical instruments. And design, install and debug the multimeter. Enable students to master electrical safety technology, first aid knowledge of electric shock, and the use of common electrical tools and electrical test instruments.

Learn the installation and maintenance of internal and external projects and the wiring and debugging of electrical equipment. Enable students to master basic operation skills. Learn the installation of lamps, the installation and wiring of single-phase watt-hour meters and three-phase watt-hour meters.

(3) Electronic practice

Learn the testing and selection of electronic components, and carry out the training of (tin) welding technology. Design and manufacture electronic circuits of small electronic equipment. It is required to draw the schematic diagram and construction drawing of the circuit, compile the list of components and materials, and write the design instructions, so that students can initially master the design steps and methods. At the same time, let students assemble and debug electronic circuits by themselves, and familiarize them with the knowledge of the use and maintenance of common electronic instruments and equipment.

(4) Motor maintenance practice

Make students familiar with common motor repair tools and materials, and use and select them correctly; Master the disassembly and rewinding process of small squirrel-cage asynchronous motor and small transformer and the quality inspection after repair.

(5) Electronic Automation Design Practice

Familiarize students with the use of commands and tools of computer-aided circuit design software PROTELD. Can use computer to draw circuit diagram and design corresponding printed circuit board.

(6) Understanding practice

Through this practice, students should understand the production process of chemical products and the characteristics of chemical production, and initially obtain the perceptual knowledge of power distribution system and electric drive in chemical plants.

(7) Practice of Single Chip Microcomputer

Through practice, students can design a small single-chip microcomputer system by themselves. In order to understand the application method of single chip microcomputer technology in electronic equipment.

(8)PLC practice

Learn how to use PLC and programmer, draw ladder diagram according to process requirements, write complete program and debug program.

(9) Intensive training and textual research of electrician skills

Technical operation skills training for intermediate electricians, so that students can fully master the skills, skills and know-how of maintaining intermediate-level electricians. Have the ability to use electricity safely and master the first aid method of electric shock. Pass the post operation examination recognized by the professional department and issue the electrician post operation certificate.

(10) graduation link

The purpose of graduation is to enable students to make full use of the basic theories and professional knowledge they have learned to analyze and solve practical engineering problems and improve their ability to work independently. On the premise of ensuring the mathematical requirements, the topic should be combined with the production practice as much as possible, and students are required to complete the design task independently.