Tools/materials: colored paper (red, green and white), black colored pen, glue stick, double-sided adhesive tape and ice cream stick.
Methods/steps:
1. Cut the colored paper into squares with the size of 1: 1. I use colored paper, the size is 15cm* 15cm. White and green colored paper are cut into strips of equal length, and I use 15cm* 1cm.
Stick a green note on one side of the red paper.
3. Put a white note beside the green note.
4. Stick symmetrically as shown in the figure.
5. Draw some black spots on the red paper with a black pen.
6. Then fold it into an organ.
7. Fold it in half again, and the first set of fan blades will be ready. There are always two sets of blades. Repeat the above steps and make another set.
8. Glue the left and right sides of the two groups of leaves together with a glue stick.
9. Prepare two ice cream sticks with appropriate width.
10, stick the ice cream stick and fan blade with double-sided tape.
1 1. Foldable watermelon fan, complete.
The practice of fans
1. Material: paper or cardboard, fan bones (such as bamboo sticks or wooden sticks), adhesive tape, scissors, pencils or other painting tools and decorations (such as ribbons and shells, optional).
Second, the steps:
1. Paper preparation: Select appropriate paper or paperboard as the sector. Generally speaking, paper with bright colors and light texture works better.
2. Making fan ribs: Use fan rib materials (such as bamboo strips or wooden strips) and cut them into appropriate lengths according to the expected fan size. Generally speaking, a fan can have 6 to 8 fan bones, and the bone length should be gradually reduced.
3. Sketch the outline: Lay the fan flat on a horizontal table, and gently sketch the outline of the fan with a pencil or other painting tools. You can choose your favorite shape, such as circle, fan or other shapes.
4. Cut the sector: according to the described outline, cut the paper into the corresponding shape with scissors.
5. Install the fan ribs: evenly distribute the prepared fan ribs on the edge of the fan and fix them with adhesive tape or glue. Make sure that each fan bone is in contact with the paper so that the fan can be opened and closed.
6. Decorative fan (optional): If you like, you can add some decorations to the fan, such as ribbons, shells and feathers. Glue them to the correct position of the fan.
7. Final adjustment: Make sure that the position of the fan bone is correct and the paper is not loose. Check whether the fan can be unfolded and folded normally.