First of all, prepare materials, such as beads, pendants, scissors, lighters, pendant ropes, etc. When you get everything ready, you can start to operate it. Generally, pendant ropes sold in the market will have knots. Open this knot first, then tie a single knot in the middle of the thick rope, then merge the thin ropes and light the thin ones quickly with a lighter. At the moment when the rope is cooked, rub it into a sharp line with your thumb and forefinger, which makes it easier to wear beads.
Second, after beading, drag the beads to the lower end, then put the rope through the hole of the pendant, separate the combined rope, wind it twice, tie a knot in front and a knot in the back, cut off one end of the rope with scissors and cut it against the root.
The second method is as follows:
1, ordinary pendant rope thick, not easy to string. At this time, we need to bake the rope with fire, pinch it while it is hot, and let the rope pass through the hole. Be careful not to burn yourself.
2. The rope we use is usually double-stranded, so let's put the burnt double-stranded rope through the jade pendant.
3. After passing through the pendant, reserve the length, as shown in the figure, and leave the binding length of appropriate length such as 1cm according to personal preference.
4. Open one end of the rope and tie a knot at the other end. Be careful to tie it on the back of the jade pendant, because tying the knot in front will affect the beauty of the jade.
5. Go around and tie a knot on the other side.
6. Reverse the knot again.
7. Knot one by one until the length of the rope head remains.
8. Finally, wring out the end, then burn it with a lighter, take it out by heating or squeeze it with something else, so that the joints are easier to stick together.