The 45-degree joint of the door cover is formed by obliquely cutting the door cover in two directions. This technology requires slightly higher construction technology than the right angle, and the installation time is longer. If the splicing is not tight enough, the gap of the door cover behind the switch will become larger, which will lead to slow cracking in the future and easy to hide ash. In addition, the company also considers that if the door cover is split at 45 degrees, it will also carry out after-sales maintenance. As long as the owner does not raise any objection, it is basically installed at 45 degrees.
The right angle eliminates the horizontal and vertical door frame cutting steps, which is simpler than installation. Just button the buttons on both sides of the door cover, and you can't see the gap intuitively. This kind of decoration is more suitable for simple family decoration style, and the door will be more natural and easy to fall down. In addition, many owners don't pay much attention to the small details of the door cover, and ordinary workers will accept how to install it, so the owners don't know the direct difference between the two.
From the practical and aesthetic point of view, the right-angle splicing of door covers is more suitable for the current home decoration than 45 degrees. However, when making the right-angle door cover, the poles on both sides of the door cover are slightly higher, which makes the height of the indoor wall visually extended, but the part beyond the top of the cover will feel a little abrupt.