Question 2: What are the two sides of the fan sticking to the fan bone? You should stick the fan to the big bone with the paste of calligraphy and painting (that is, after gluten removal). If it is a collectible fan, you can't use glue, bone glue and peach glue are not good, and chemical latex can't be used.
With traditional mounting, the fan can be detached and installed for future preservation, which is very complete and beautiful. But after the glue is solidified, if you want to make it lose its glue (in order to disassemble the fan), you have to soak it for a long time to make it deteriorate (as the saying goes, moldy), so the whole fan will be destroyed.
If you use chemical paste, you don't have to wait for the cover to be uncovered. In a few years, all the places where you brush the glue will turn yellow (some amateurs will use tape paper to stick the sector, and after three to five years, all the sticky places will turn yellow)-this is because all chemical glues contain acidity or alkalinity (because the types of glues are different, either acid or alkali). Moreover, the properties of inorganic chemical adhesive changed after curing, and the water resistance was very strong, so it could not be completely peeled off. Then, we had to give up the part connected with the big bone.
The fan bone you use is ebony. Even the staple food now costs four or five hundred yuan. The calligraphy and painting on this fan should be a famous painter or a big shot, which has high collection value. Then keep the integrity of the original fan, which is very important for its collection value!
============================
Hehe, don't worry about the original first floor. I'm not aiming at your personal opinion.
Just ask an old artist who is a fan, or a painter or collector.
Question 3: What glue is used to stick the fan and the fan bone? Glue (including homemade paste) will do. Some professionals will use diluted latex or glue made of animal skin, such as fish glue, for cementing, but the effect is different.
In effect, glue and diluted latex are easy to melt in water, which is suitable for beginners to make, which is also the only advantage. Animal glue has a certain degree of water resistance and will not melt easily, but it will be very troublesome to replace the sector and it will easily damage the sector. These three methods have their own advantages and disadvantages.
If it is a collectible fan, you can't use glue, bone glue, peach glue and the like, and you can't use chemical latex and the like.
With traditional mounting, the fan can be detached and installed for future preservation, which is very complete and beautiful. However, with traditional glue such as bone glue, if you want to make it lose its gel property after solidification, you have to soak it for a long time to deteriorate it, which will destroy the whole sector.
If you use chemical paste, you don't have to wait for the cover to be uncovered. It won't take many years, and all the places painted with glue will turn yellow. This is because all chemical glues contain acidity or alkalinity. Moreover, the properties of inorganic chemical adhesive changed after curing, and the water resistance was very strong, so it could not be completely peeled off. Then, we had to give up the part connected with the big bone.
Question 4: Ask Tian Tian: Do you have the skills to stick a fan? It is best to stick it with paste, and it will stick firmly as soon as it is stuck; The second paste is made of flour, which is easy to remove after being wet with water, but you must be patient and never be rough! In addition, you can also use white latex and double-sided tape (some are modern). Glue is generally harmless to the bones of fans! It is not difficult to stick the sector well: the two strands of the sector should be evenly coated with paste; When pasting, ensure that the folded edge of the fan is flush with the edge of the big strand; Then fix it for 2 ~ 3 minutes, and then gently open the sector (the glue is not dry yet) to check whether there are wrinkles and gaps on the sector that the glue has not touched. If there are wrinkles, flatten them, and glue them where there is no glue; Fold the sector again and fix it until the glue is dry! I wish you success: shake hands to see more answers >>
Seek adoption
Question 5: Help! You can stick latex on the fan any way you want. Thank you, brother. I have no experience in buying fans for the first time.
Question 6: What glue is used to stick the fan depends on the material of the fan. If it is wood, paper, textile or cloth, HY- 10 1 glue can be used, which has good initial adhesion and fast curing.
Question 7: Can you draw or inscribe when the sector is stuck? This is not a problem for highly skilled painters and calligraphers. A long time ago, many painters and calligraphers used to draw and write on glued sectors. I have met the late painters and painters many times, such as Wang Xuetao, Li Kuchan and Qi Gong. You can paint directly on the glued folding fan, and in the process of painting and calligraphy, it is completely unaffected by the adhesion of the fan, so it is an effective method to test the ability of painters to paint directly on the glued fan.
If it is my first time to draw a folding fan, I'm afraid I won't feel uncomfortable because I don't have specific practical experience in this field, because the level of what I draw is far from that of what I draw on flat rice paper. After many times of practice and familiarity with the master method, you can naturally draw and write directly on the glued folding fan.
After being mounted, the rice paper used to make the fan should be treated with alum and then cut into the fan, so that the ink leakage and color leakage can be strictly prevented when writing and painting the fan. Therefore, when painting and calligraphy on the fan, don't use alum to treat the fan.
Question 8: What glue is used to bond the sector and ribs? Professional glue is used. You can use glue that sticks to your shoes at home, such as 10 1 glue!
Question 9: What should be used to bond the fan bones and sectors? Thick couplets
Question 10: How to stick the fan painting? Double-sided tape can stick the fan to the fan bone.