First of all, before arranging the camera, you must first decide where to put your camera and at which point to fix it. Shoot what? The fixed position of the camera is very important. What kind of camera are you going to buy? The main parameter of the camera is the effective distance. Ordinary people are generally around 600 yuan, and night vision is above 900 yuan.
The location of the camera needs to be selected according to the needs and conditions of the site. Take out the surveillance camera bracket and prepare tools and parts: expansion plugs, screws, screwdrivers, hammers, electric drills and other necessary tools; According to the pre-determined installation position, check the size and model of expansion plug and self-tapping screw, try whether the bracket screw and the camera base screw are suitable, whether the embedded pipeline interface is handled well, whether the test cable is unblocked, and enter the installation procedure when it is ready.
2. Pick up the camera bracket, first install the chassis on the bracket, and then install the camera on the bracket.
Third, check whether the power supply is the camera power supply.
Fourth, connect the power plug and the camera plug.
5. Take out the BNC wire, cut a short section of exposed copper wire with a knife, connect the BNC wire to the BMC interface, and tighten it with a screwdriver.
6. After the two ends are connected, connect the computer host or camera hard disk while connecting the camera. Install the acquisition card on the computer motherboard and install the driver; Put the camera in a suitable position, connect the power cord, weld the BNC head and pull the cable to the computer; Weld a section of BNC head, connect it to the acquisition card, and turn on the power.
Just configure the acquisition card and change the storage time or mode.
Seven, check and debug, after debugging, you can see the monitoring screen on the computer.