You try to change a host and reinstall the software. Unless you do it yourself, you need professionals to go to the scene to see the specific reasons.
Here are some solutions to the common problems of EDIUS:
1 Question: How long does it take to compress a DVD in HDV format?
Solution: The theoretical time ratio is above 1: 2, which requires more detailed testing.
2 Question: How to call EDIUS to 5. 1 channel?
Solution: Using other audio software, multi-channel files can be called in EDIUS software, and
Each channel can be adjusted independently. The specific method is that the audio track should be set separately, not vertically.
Body sound 1.2.3.4 ... How many channels will be built, and you can see them in the material window.
Up to now, how many channels does the called audio file have?
Question 3: What is the problem of subtitle position and font conversion when high-definition projects in EDIUS are converted into standard-definition projects?
Solution: QUICKTITLER software must be used, and it must be placed on the video track, not on the subtitle track.
TITLEMOTION software doesn't work, it must be migrated.
4 Problem: After the installation of EDIUS software, the error "Unable to read memory" suddenly appeared when opening EDIUS.
Resulting in the soft part not being opened normally.
Solution: This is due to the WINDOWS system, usually after changing the desktop theme.
5. Problem: In EDIUS, it is impossible to use the interface of the cassette for synchronous recording.
Solution: Using the synchronous recording function in EDIUS, you can only input it in the sound card, but not in the board card.
Audio input of.
6 problem: When editing with Edius, the monitor window disappears due to misoperation or after modifying the resolution.
Outside the display area.
Solution: Press Shift+F 1 to bring up the menu and select General in the layout.
7 problem: The same tape records HD and SD signals at the same time, and there is signal input after the software is set.
But after a period of time, suddenly there was no signal input, and there was no signal input for correct engineering settings.
Solution: Reset the non-programming 1394 line after resetting EDIUS to the same item as the current signal.
Connection can solve the problem. For Sony equipment such as Z 1C, FX 1E or M 10C, i-LINK can be used for down conversion.
Yes, high-definition recording signals can be output in standard definition.
Question 8: When Edius 3.61uses SP2 XP, TM subtitles are often reported as errors and then automatically closed.
Close subtitles, but there is no problem under SP 1
Solution: It may be caused by DEP technology of Windows XP SP2 (which can effectively avoid buffer overflow).
To solve this problem, the program should be configured not to detect DEP. The method is: in System Properties →
In the Advanced → Performance Settings → data execution prevention dialog box, select Except for the following programs for the selected program.
Enable all programs and services except DEP, and then add the executable file of the program to the list.
List and restart.
The main meaning of Canopu HQ coding
Solution: Q: Indicates image quality.
Maximum size: used to adjust the compression ratio.
Selection basis: The image should be noise-free.
For example:1440 *1080 60i100% or so: 750Mbps.
1440* 1080 60i 27% or so: 200Mbps.
10 Question: The purpose of video overlay setting.
Solution: It is mainly used to tear columns when the image moves quickly.
Faster: type 1
High Speed: Type 2 Type 3
When there is no response from Geforce 6600 graphics card, choosing type3 may solve the problem.
1 1 problem: 3.6 1 EDIUS needs to select the type of signal source, otherwise it cannot be collected.
Solution: After the project is set up and the input interface is selected, acquisition and coding must be carried out in the input settings.
Settings for proper collection.
12 problem: M2P generated by EDIUS cannot be played in XP SP2 system MediaPlayer.
Solution: It can be solved after installing RealOne or PowerDVD.
13 problem: EDIUS produces left and right channel separation effect.
Solution: When the left and right channels are separated by the "audio potential balancer" filter, sometimes they will be unclean and need to cooperate with the project.
Set the audio channel table in to specify whether 1A and 2A are left or right channels respectively (set 1A as the left channel and 2A as the full channel).
For the right channel), the tracks 1A and 2A are set as stereo channel 1 and stereo channel 2, respectively. After the material is transferred,
The left and right channels will be automatically placed on tracks 1A and 2A, respectively.
14 problem: after installing the hard daughter card, there should be additional selection settings when outputting m2p with procoder.
Software or hardware compression, but sometimes this option is not available.
Solution: At this time, you can choose advanced mode, and there will be two mpeg items, namely mpeg and mpeg (hardware).
15 problem: The option of splitting files during collection has been correctly set in EDIUS, but NX uses DV to collect images.
Still divided into multiple segments.
Solution: the continuity of tape time code must be ensured, or the time code must be pre-laid before recording (using AJ-455MC.
SET+REC can reset the time code)
16 question: can I set the range of color key deduction in EDIUS?
Solution: There are both light keys and color keys. When using the bright key, there is "rectangle selection is valid" at the bottom of the window, just check it.
You can draw a rectangle, the inside of which is displayed according to the effect of bright buttons, and the outside is completely transparent; If you choose at the same time
Next to the middle, "the outside of the rectangle is effective", the outside of the rectangle is completely opaque, and the inside is displayed according to the button effect. chroma key
Button, select "Rectangle Selection" on the right. After choosing, you can draw a rectangle, the outside is completely transparent, and the inside is
Button image effect. However, the job should be added after setting the button image, because the button image cannot be set when adding a box.
17 problem: On the EDIUS timeline, the original materials with transparent channels disappeared after rendering.
Solution: The correct rendering method is to press the Q key after playing the material in and out in real time, or from
Select Render All from the Render button. If you right-click the timeline material and select "Render", the channel
Will disappear.
18 problem: TM appears a prompt "WINDOWS closes the program due to unstable operation" during use.
Solution: Because TM is not completely installed, it can be solved by reinstalling it.
19 question: how to collect the files of Sony CD camera?
Solution: Sony CD-ROM camera can collect .m2p files from CD-ROM drive, but the collected files are in edius.
When calling, it will cause edius to crash (high-configured machines can be tuned up, but the frame will be lost when playing). can use
Procoder directly converts the format before use, or directly opens the file conversion in the CD.
20 problem: FLASH file EDIUS software can't be imported, or in Procorder Express and
PROCODER can't import?
Answer: When exporting MOIVE software of flash, when choosing FLASH version, choose flash5, when audio.
No options, or choose the audio format supported by EDIUS software, you can call in.
2 1 problem: the EDIUS BP option calls P2 HD50i material, which can only be converted into audio, and there is no image.
Solution: Upgrade the BP option program and upgrade the EDIUS software to 3.62.
Problem After EDIUS merges the project and saves it, when he opens the project again, he will prompt the material to go offline, pointing to
When restoring the original material, I was told that the material information was inconsistent and could not be restored. The original project can be opened normally.
Solution: Cancel restoring offline materials. Use the optimization engineering tool to copy the used files into the project folder.
When this item is checked, the offline material of the optimized project will be restored.
Question 23: EDIUS edited the project and opened it normally again. After copying the project folder to another hard disk,
When you open it, you will be prompted that a TitleMotion Pro subtitle is offline (other TM subtitles in the project are normal). Recovery separation
When the line material points to the file under the current folder, the material information is inconsistent and cannot be recovered, and the original folder will
The file cannot be recovered after being copied again.
Solution: When restoring offline, you can restore by pointing to the original folder. After the recovery is completed, open this TM file and the other one.
After saving to a new folder, the problem will be solved.
Problem: The "frame matching jump" function in EDIUS sometimes doesn't work.
Solution: This function is related to the time code in the video file. If the time code is not recorded in the file,
If it is correct, this function cannot be used. Known file formats that can be used are: Canopus DV AVI,
AVI, MS DV AVI, MOV； of the headquarters of Laorenxing; The inapplicable file formats are: MPEG 1, MPEG2 PS,
MPEG2 TS，WMV .
Question 25: JPG file in EDIUS software can't be opened, but tga file can.
Solution: (1) uninstall the software with QUICKTIME code library, such as Storm Video (make sure no one is in the computer).
High version of QUICKTIME code base, otherwise the new one cannot be installed);
(2) Installation and component selection of Storm Video
When will I put a box in front of "I have installed QUICKTIME program", and then I will be prompted during the installation process "Do you want to install it?
QUICKTIME Decoding Library ",selectNo.. (For CD collection and installation, there is no need to skip this step);
(3) There is a QUICKTIME player in the installation disk, so please install it (install QUICKTIME components).
Question 26: The simultaneous installation of EDIUS and Kingsoft Express failed to start.
Solution: There will be a conflict between Kingsoft Express and Edius, and the system will be normal after uninstalling Kingsoft Express.
Problem: When importing an EDL table in EDIUS, the audio track is empty and there is no audio.
Solution: Before importing the EDL table, set the audio track to stereo 1 2.
In addition, it should be noted that if the imported/exported EDL table is used by AVID or Premiere software, it should be guided in the setting of EDL table.
The output format is selected as mode 2.
Question 28: The TGA image sequence output by EDIUS is called under AE, and both N system and P system projects will be displayed.
The time is shortened to 30 frames per second.
Solution: Performance-> Import->; The footage is set to 25 (the default is 30).
Question 29: After using the left and right keys of the keyboard to move the pointer, EDIUS4 can't take a correct screenshot with CTRL+T. For example, using a mouse.
Punctuate to a position, and then use the left and right keys to move the screenshot or cut off the image of the mouse position.
Solution: Upgrade to EDIUS4.03 or above.
About the use of P2 card.
Solve:
(1) When using the P2 material import tool in EDIUS, if reading the P2 card, directly select the P2 card.
The drive letter formed in the system can be formed by reading P2 data stored in the hard disk and selecting P2 data.
You can use the folder above the Contents folder in the directory or directly call the clip file in the material library.
*. xml file under the folder;
⑵ At present, the P2 material import tool in EDIUS, the function of "importing merged files" can not be used normally, and there is no.
Method to merge more than two files on the card;
(3) P2 file edited in EDIUS can be inserted into PCMICA slot of notebook.
P2 card, write the timeline material back to P2 card, but use USB on desktop or notebook.
When HVX200 is connected, P2 card cannot be written back, and the prompt "Cannot write file" is given;
(4) Write the materials back on the P2 card. If it is played back with HVX200 camera, it should be based on file format.
The shooting mode of the camera is set to the corresponding format, otherwise it cannot be played back and viewed. The order on the file thumbnail is
The column number is displayed in red;
5] In EDIUS4.02, you can upload DVCPRO normally through 1394, but when you output 1394, the whole screen is full.
There will be mosaic phenomenon, contrary to the version before EDIUS4.02;
[6] At present, compared with other non-editing software, the biggest advantage of EDUS software is that it supports DVCPRO HD format.
Is the best support for DVCPRO HD720/25P/50P and 720/25PN;
3 1 Question: How to output Canopus HQ file with channel in AE?
Solution: Specific operation steps:
Step 1: Select: Composition from the menu of AE, and select "Make Moive" from the drop-down menu.
Step 2: Click the "lost" marked in the red box below.
Step 3: Click "Format Options ..." and mark it in the red box below.
Step 4: Expand the encoder list shown below, and select "Canopus" in the expanded encoder list.
HQ ",and select" RGB+a PHA "in the channel list after confirmation.
Q: I downloaded the wedding materials in MOV format. How to load it into EDUIS as a template?
A: EDIUS4 uses EDIUS4, which supports MOV format materials.
Q: the AVI file generated by edius3.0 can't be generated at 3.99G g, what is the reason?
Answer: Your hard disk file system is FAT32, right? Change the hard disk file system to NTFS.
Because FAT32 does not support a single file larger than 4GB.
Q: Windows Media Player and ED cannot work at the same time. As long as the former (including the other party)
Some video software, such as PR, cannot be previewed once used.
A: They use the same graphics card to display superimposed channels, so ...
Q: How to add more than two special effects to a material at the same time? In the same material, I am
What can't add more than two special effects? Such as 3D picture-in-picture and chroma keys.
Answer: Do it first, generate this paragraph and then add it.
A: aren't there many timelines in ed? We use 3D picture-in-picture on a line and drag this line.
Enter another timeline and use the chroma key, which is very fast. No generation is required.
Q: How do I move the following tracks forward synchronously? 2。 Move the back material to the front.
Face, how can you not minimize the front material? I used EDIUS4.
A: You can try to delete spaces by right-clicking the gap, which should make all the material tracks move forward as a whole.
A: Hold down Shift+Alt at the same time, and then drag the material behind.
Q: My EDIUS3.3 1 software! Why can't I see the full screen on the computer when I add the transition stunt?
Really? What's going on here? Thank you very much That's why in Idius, after I do slow motion, ghosts appear in the characters.
Huh? The slow motion I added was 35%
A: You haven't described the problem of full screen clearly. This is at the edge of the screen, there is no transition.
This is because by default, the transition filter only deals with the visible area of the TV. Sure, you can watch it on the computer.
There is an edge that has not been processed. To solve this problem, you can enter the settings panel of the filter and only process the screen.
If the visible area is removed, full-screen filtering can be performed. The following questions will not:)
Q: How does edius automatically add special effects to all the materials?
A: Please see "Problems in the Use of Special Effects in EDIUS".
/read.php？ Tid= 13428 has instructions in it.
Problems of stunt use in 39 EDIUS
(tutorial link) /read.php? tid= 13428
Q: How to output Canopus HQ file with channel in AE?
/read.php？ tid= 19874
4 1Q: use transition-xplode eduis+3dobject+standard-xplode pro+3dobject+standard to combine the above groups.
Any transition effect added between two materials has the problem of "parking"! -
Answer: 1. Replace the original high quality with the fastest. 2. use the graphics card to accelerate. 3. Set the buffer to maximum. Not yet.
If possible, render or upgrade the machine.
Q: Why render? What's the difference between rendering and generating?
A: When the materials and stunts on the playing timeline cannot be previewed in real time, they need to be rendered, and that's all.
To see the effect. Generation is to output a complete file on the time axis.
Q: Can Idius push quickly?
Answer: Use the 3D picture-in-picture effect.
Q: Will there be any loss of clarity after the picture is generated several times? Is it serious?
A: The special effects screen can be rendered, and then special effects can be added. You can also create a new sequence and then add it to the sequence.
New stunt. This is much more convenient than generating new files again and again.
Answer: Did the landlord use ED3? You did the right thing. Adding complex stunts can only be done in ED3, and
There will be no loss, because all video files are stored digitally. You just need to generate a number, so don't worry.
Do this.
Q: When do you use ripple mode? What's the role?
A: When you copy clips on one track, such as ripple deletion or stretching, other tracks.
The material will automatically follow up.
Q: How to call TGA sequence in EDIUS?
Answer: Modify the length option in the program settings, set the static frame to one frame (00: 00: 0 1), and then
Then select all TGA sequence files and put them on the timeline. If the playback is not real-time, generate them and then generate them.
Play normally.
Editus 4 later, when the file is opened in the material window, select the sequence file (sequence text).
Tick) will do.
Q: Ask questions about editing comic books!
Please help me to answer the question about edius clip, that is, sometimes the color of the clip.
The weather is different, sometimes it's green and sometimes it's yellow. What's the difference? In addition, the editing of av is also divided into sections.
Three paragraphs, the upper paragraph is a video, the middle paragraph doesn't know what it is, and the lower paragraph seems to have added a transition.
Also, I have encountered the problem that I can't add a transition, and I found that the clip bar is different. You can add a transition.
Green, there is nothing in the four corners of the clip. What can't be added with transitions is yellow, and the middle of the clip bar is empty.
Yes, there are triangles in the lower left corner and the upper right corner of the clip bar. ..... Also, I made up two subtitles and put them on.
Two rails, but the upper rail can't cover the lower rail, even if it is placed on the av rail, it can't cover the lower rail.
I am skeptical, why is this?
A: The clip is divided into three sections, with video above and audio in the middle, and special effects can be added below. As for editing
The color of the album can be adjusted by yourself. Subtitles are transparent, so any track can display the following picture. have only
A subtitle is a color block.
Q: I use subtitle software to make scrolling subtitles, and there are several problems that are unclear. Please seek help.
1, it seems that the text is not well aligned.
2. I don't know how to adjust the speed when scrolling.
3. You can't add a blank position when you start scrolling.
A: 1. I don't understand what you mean by being right.
2. The longer you drag the subtitles on the timeline, the slower they scroll, and the shorter the subtitles, the faster they scroll.
3. Tap the space bar in front of the scrolling subtitles until the first line of subtitles moves to the bottom.
Q: How can I get the camera to take pictures?
A: Freeze the filter
A: White flash +3D picture in picture.