First, the preparation work that needs to be done is the preparation of construction materials. All necessary construction materials must be prepared and perfected, and then the elevation is carried out according to the planning drawings, and the horizontal line is played well, and then the keel can be installed.
Second, the circular ceiling is not independent, and it should be coordinated with the personality of family decoration. In the color selection of circular ceiling, it is best to choose a single tone. The color usually chosen is white, which makes it easier to match all the decorative personalities. If the ceiling is brightly colored, it will often make people feel suffocated, and the whole space will become much smaller visually.
Third, the installation process of the keel is not complicated, but the keel is the key to the stability of the ceiling, so we must be careful. Usually, it is necessary to choose a suitable gypsum board ceiling keel to ensure the stability of the keel bracket, cut the wooden strips into the required length, project a horizontal line on the edge of the wall, and nail the wooden strips on the wall with a hammer and steel nails according to the horizontal line. This alone may not be strong enough, so it needs to be reinforced again with a pneumatic nail gun.
Four, because the structure of the circular ceiling is composed of wooden keel and plywood, so before installation, the plates should be glued and fixed, and the stability of the ceiling should be adhered to. The main function of plywood is to make it round by its plasticity. Usually, the circle in the plan is made on the ground first, and then the device is fixed on the top surface. The circular corner of the ceiling can be repaired with small plywood. In addition, after installing the wooden ceiling structure, gypsum board can be installed outside it, that is, the end of the ceiling sealing plate.
5. There are many matters needing attention in the decoration process of circular suspended ceiling, such as making early preparations before construction, using things that meet the standards, keeping the keel device in strict accordance with the requirements, and controlling the device requirements of suspenders within a suitable range. Together, the householder can bring a tape measure into the construction site to check whether the keel device meets the device standard according to the planning drawings, so as to prevent some construction teams from violating the specified device in order to save the data.