Front lens soft light dual camera is equipped with dual camera on such a low-end machine. Shortage is the first one. The pixel is not high, only 500w has dropped by 200W, but the self-timer is full, and the fill light effect of soft light also gives you a transparent makeup. The overall brightness is obviously improved, and the skin color is more slender and natural. The overall artistic sense is stronger. The rear lens is a single lens, 1300 watts. The quality of sunny days is good, the light is dark, and I complain a little.
The striking function of MiFavorUI.2 system of ZTE BladeA3 is face recognition. In short, the core of face recognition technology is actually local human feature analysis and graphic/neural recognition algorithm. The algorithm uses various organs and feature parts of the face to form recognition parameters, and compares, judges and confirms all the original parameters in the database. It's really a surprise for this machine. The recognition speed is very fast. Face recognition lock is being released.
The battery life of 4000mAh is long, and the software auxiliary facilities with power saving/power saving function are added. Generally speaking, it is absolutely no problem to use it for one and a half days, and the back cover can also be removed. Although the battery can't be removed at will, it can be replaced quickly for a baby with strong hand skills. But if you can make an all-in-one machine, you need to reduce the thickness of the mobile phone. Therefore, the thinner the better.
The packaging of mobile phones is very strict, and the descriptions of various services are also very clear. It would be nice if you could put on the film yourself, instead of putting on the foam yourself.
In terms of configuration, ZTE A3 adopts a 5.5-inch 720P display, a MediaTek MT3737T processor and 3GB of memory; 32GB memory, front camera with 5 million pixels, rear camera with13 million pixels and battery capacity of 4000mAh. The battery is gratifying, the processor is poor, the operation interface is good, ZTE system is excellent and smooth, and there is no messy software. Very practical, gadgets shine at the moment.
Unfortunately, A3 lacks the home button and is not suitable. Here you can bring up a typical Android three-key design, which automatically hides in the locked state and pops up after unlocking, which is inconvenient to operate.
A3 adopts 3D sandblasting technology, which not only brings metallic feeling, but also provides the weight of plastic fuselage, which can be well grasped for a long time. On the side of A3 are the on-off key and volume adjustment key, and the 3.5mm earphone hole is located on the upper part of the mobile phone. The design of three slots is rare. There are at least two SIM cards now. If the memory of the mobile phone is insufficient, it will not be embarrassing to insert the memory card. Especially the elderly like to store dances, dramas and dances.
As a product with a price below 1000 yen, A3 does not use the flagship camera, but with the support of excellent algorithms, the overall photographic effect of the rear camera can reach many cameras with a price of 1000 yen currently on the market. In particular, there should be various modes in the settings, whether it is delay or HDR. Of course, most mobile phone lenses are not very good in dark light. Huawei's P9plus (my mobile phone) is not good, and it is cheaper than A3.
Advantages: For a mobile phone with a price of only 799 yuan, A3 can be said to be very cost-effective. In terms of design, 2.5D glass has no sense of cheapness as a 100-yuan mobile phone. The space of 3 GB and 32 GB and the soft light effect of the two photos in front of the photo are also satisfactory. It can be said that it is conscience to have both fingerprint authentication function and face authentication function.
Disadvantages: insufficient home button, poor dark performance of mobile phone lens, and a bit heavy thickness. Of course, this is nitpicking, and this phone is definitely worth recommending.