Installation method of lamp film ceiling
1. Preparation before installation: Before the soft light film ceiling enters the site, make sure that the site is electrified and there is no construction waste. The bottom treatment of flexible membrane ceiling meets the installation conditions of ceiling, such as keel frame installation. Be clean. The installation of all lighting fixtures must be carried out according to the required dimensions, and the wiring must be arranged to ensure that all lighting fixtures are electrified and bright. Before installing Bayi soft film, if any lamps are not bright, they should be adjusted and replaced in time. The interior of the hidden lamp should be painted white to achieve better effect.
2. Construction process: firstly, install the keel of the soft light film ceiling. According to the design requirements of the drawings, a circle of 4X4Cm supporting keel is fixed around the horizontal height position where the flexible membrane ceiling needs to be installed (in some places, it is required to be installed in blocks when the area is relatively large, which can achieve good results. This requires adding a wooden square in the middle. When all the required battens are fixed, the aluminum alloy keel of the flexible membrane ceiling is fixedly installed on the bottom surface of the supporting keel.
3. Install the soft light film ceiling: Install the soft light film after all the aluminum alloy keels on which the soft light film ceiling is installed are fixed. First, open the soft film, fully and evenly heat it with a special heating air gun, then insert the soft film into the aluminum alloy keel with a special inserting knife, and finally completely trim the redundant soft film. After installation, clean the soft film smallpox with a clean towel.
Matters needing attention in installation of lamp film ceiling
1, you can't blindly decorate the ceiling.
Many people think that installing the ceiling will improve the grade of the home, so they blindly install the ceiling regardless of the actual situation of the room. In fact, not all spaces are suitable for ceiling installation. In the case of a low-rise building with relatively narrow space, if the ceiling is installed, people will feel nervous and depressed visually, which will lead to physiological reactions, which is not conducive to people's living.
2, the ceiling height should be appropriate.
Different floors of the ceiling will give people different psychological feelings. Calculate the height of the ceiling before decoration. If the height of the house is only 2.6-2.8 meters, you can choose to make a simple ceiling around the ceiling, not too big. Generally, the ceiling height is about 2.3-2.6 meters.
3. Height
Downlights are usually installed on the ceiling. The specifications of downlights commonly used in home improvement are 2 inches and 2.5 inches. After installation, the clearance height is 1 10MM, and the adjusted height is 130 mm, so if a friend intends to choose downlight, the space height of the ceiling should be reserved in advance.
4. Thickness
The function of the ceiling is to hide what people don't want to see or make it into a certain shape to achieve special effects. The ceiling thickness of the bedroom is generally 140-200mm, but the specific height depends on the site and design.
I believe that after reading the above contents, everyone has a brand-new understanding. Thank you very much to everyone who reads this small series. It is your's reading that gives us the greatest support and motivation. I hope it can help you to make reference when you encounter the same situation in the future.