Stage preparation
The ground is going to change! Make sure it is clean, flat and free of oil and dust. Then according to the design drawings, choose the size and layout for the floor tiles, and get ready to debut!
Floor tile reconstruction
Measure the diameter of the floor tile and calculate its floor area. On-site investigation, choose the most suitable slope, straight line or descending plane for placement. Determine the starting point and plan the path of the magical journey of floor tiles!
Floor tile debut
Apply adhesive, level the ground, and get ready for the gorgeous appearance of floor tiles. According to the design scheme, put the floor tiles one by one, and keep the gaps consistent. Check with a level to ensure that each floor tile is in the correct position. Irregular edges? Trim easily with a tile cutter or a glass cutter!
Fine-tuning magic
Tap the floor tile gently with a rubber hammer to ensure that it is flat and correct. The seams are firm, the area is the same, and there is no need to entangle in the collage process!
Waiting for the magic moment
Glue usually takes 24 to 48 hours to dry and fix the floor tiles to the ground. Wait patiently, magic is about to happen!
Perfect ending
After drying, fill the gap with caulking agent and smooth it with spatula or wet cloth. After the gap is filled and dried, choose the color that matches the floor tile to fill it. Finally, wipe the floor and present it perfectly!