Matters needing attention in the construction of flexible membrane suspended ceiling
1. When installing the wave shape, in order to make it look neat, the underframe of each keel should be consistent, and the underframe in contact with the soft film must be smooth, so that the installed ceiling will look better.
2. If there is a gap between the soft membranes, then when installing the underframe, the suspender and keel need to be made of thinner materials, so that when people look up, they can't see the suspender fixing the underframe, and try to be hidden and tidy.
3. The flexible membrane ceiling should be heated before installation, especially when the temperature is relatively low, and it should be heated before dismantling the crystal cotton. Too cold will make the soft film brittle, leading to wear during installation.
4. When installing the arc-shaped flexible membrane ceiling, it is recommended to use a bending machine to make the flat code into an arc, but there can be no cutting marks. If you choose the cutting method to bend, cut every three centimeters, and do not exceed half of the keel thickness, because it is easy to appear prismatic.
5. If time permits, it is suggested to install the keel first, then measure the size after installation, and finally go to the store to place an order, so as to avoid problems such as modification and inappropriate size, and increase the construction difficulty and progress.
6. Before the construction of soft film smallpox, be sure to go to the field to see if smallpox has the conditions for installing keel, and pay attention to whether the wall is completed, whether the carpentry is qualified, and whether the plastering place is completed.