Fastening the safety buckle rope requires preparing the safety buckle, braided rope, scissors and lighter. The specific method is as follows:

1. Fold the braided rope in half first, and then thread it into the safety buckle hole.

2. Put down the top two ropes, put the right rope on the middle rope, and then press the left rope on the right rope.

3. After bypassing the bottom of the middle rope, pass through the hole on the right, and then tighten the two ropes.

4. Then put the left rope on the middle rope, and the right rope bypasses the bottom and passes through the hole on the left.

5. Repeat this step and weave to the appropriate length. Finally, cut off the excess rope with scissors and burn it with a lighter.

Precautions:

1, the rope of safety buckle should be selected as required.

2. The color of the rope should match the safety buckle, so it looks better.