Generally, only cars with ejector can have the saying that the rocker arm is up and down. The lower rocker arm is directly matched with the camshaft, and the upper rocker arm is controlled to open and close the valve in time through the push of the valve ejector rod. The upper rocker arm is in the cylinder head, and the lower rocker arm is installed on the side of the cylinder block, close to the crankcase block.
The rear rocker arm plays an important role in connecting the rear wheel and the frame, but it is often ignored when users choose a car. It seems that only four fixed points are connected. At the beginning of design, manufacturers need to spend a lot of time designing the rear rocker arm.
Extended data:
Pay attention to your health
Be sure to cool the hot car before washing, and suddenly wash the engine, exhaust pipe and other parts with cold water. The principle of thermal expansion and cold contraction is well known. Thermal expansion and cold contraction will destroy the oil seals of all parts, leading to engine oil leakage. Many motorcycle engines leak oil slightly. That's the reason. It will also cause the chromium plating layer at the joint between the exhaust pipe and the engine to fall off and oxidize and rust.
Headlights, left and right handrails, switches, exhaust ports (preferably blocked with things), speakers, cremation plugs, air filters, batteries and other components are best not to be washed directly with water;
There are circuits in these parts, which will lead to short circuit or leakage after being damp, and there will be faults such as no light, no horn, no fire and weak drive. It's best to scrub with a rag.