A chandelier is a hanging lamp. No matter whether it is hung with wires or iron, it should not be hung too low, otherwise it will hinder people's normal sight and make people feel dazzling. The chandelier is suitable for the living room, and there are many kinds of chandeliers. Be very careful in the installation process, because if the chandelier is squeezed, it will easily break. How to install the chandelier? How to install the chandelier?
The installation of chandelier needs all kinds of necessary materials and installation tools, and all kinds of accessories are connected by auxiliary materials and tools.
As long as the power is turned on, the chandelier can work normally. 1, material preparation
(1) Building materials: The following materials are commonly used.
① Wood (square, batten and plank), aluminum alloy (plate and profile) and steel (section steel, flat steel and steel plate) are mainly used as supporting members.
② Use plastic, plexiglass and glass as gaskets, external decorative veneers, radiating plates and copper plates.
(3) Anodized aluminum oxide plates are used as decorative parts.
④ Other accessories such as screws, nails, rivets, finished lamps, adhesives, etc.
(2) Construction tools: pliers, screwdriver, hammer, chainsaw, electric hammer, manual, ruler, paint brush, etc.
2, operation steps:
(1) First, choose the location where the chandelier is installed and avoid the hidden wires buried in the chandelier or ceiling.
(2) In the structural layer, iron pieces or wooden bricks are embedded, and the embedding position should be accurate, and there should be enough room for adjustment.
(3) Set transition connectors on iron pieces and wooden bricks, so as to adjust the error of the blocks, and nail, weld and screw the blocks.
(4) The suspenders and slings are connected by transitional connectors.
3. Connection of hanging cups, slings and structural layers
(1) control method: mainly consider the connection between embedded parts and transition pieces.
(1) Firstly, iron or wooden bricks (except water bricks for bearing) are embedded in the structural layer.
(2) The embedding position should be correct, and there should be enough room for adjustment.
(3) Set transition connectors on iron pieces and wooden bricks to adjust and sort out errors, and nail, weld and screw them through.
(4) The suspenders and slings are connected by transitional connectors.
(2) Precautions for installation: The following three points should be noted during installation.
(1) When installing, if there are multiple chandeliers, pay attention to their positions and right and wrong relations. The chandeliers can be installed at the same time as the ceiling, so that the position and height of the lamps can be adjusted based on the ceiling keel.
(2) The hanging rod method is called the plate shed beard method and the casing method. The practice of adding pipes is beneficial to installation,
It can ensure the integrity of the ceiling board, and only drill holes where pipes need to be placed. (3) The hanging cup directly called the barrack is not easy to aim at the hole on the board when installing. Sometimes the suspenders can be installed first, and then the panels can be cut off to dig holes, but it has an impact on the decorative effect.
(4) Derrick should have a certain length of thread for height adjustment. Pay attention to the reliability of the connection when hanging the light box under the sling boom.
4. Connection of suspenders, slings and joists.
The suspenders and slings are directly nailed and screwed on the secondary keel, or connected to the vertical grid through the above-mentioned plate perforation method. Or suspended from additional cross joists between secondary grids. The light source power used for ceiling lamps is 40 ~ 100 W for incandescent bulbs and 30 ~ 40 W for fluorescent lamps. ..
Installation method 2:
1. Material preparation: construction tools: pliers, screwdriver, hammer, electric drill, construction materials: screws, expansion screws, back strips, etc.
2, operation steps:
(1) Remove the hanging plate from the ceiling tray, align it with the empty hole in the west piece, and select the appropriate position.
If the positioning space is not aligned, pay attention to adjust the position of the screw. (2) Then, according to the installation strip, find the position that needs to be drilled on the ceiling, start drilling, select a drill bit with appropriate size, and drill a 6mm hole on the ceiling by electric rotation.
③ Screw the expansion bolt into the hole in the ceiling. You can hammer the bolt into the hole and then fix the hanging plate on the ceiling.
(4) Connect and fix the lamp board, turn off the power supply, connect the wire with the lamp wire, wrap the adhesive tape, and then fix the lamp board on the back strip.
⑤ Install the bulb on the lamp board, take it out and screw it on the lamp board carefully. After each light bulb is installed, remember to turn on the light to ensure the normal use of the lamps.
⑥ Install relevant accessories according to the instructions, take out the parts in the packing box, assemble and install according to the drawing instructions, and hang the accessories. Crystal chandeliers have different accessories according to their styles, some only have light bulbs, and some also include crystal balls, crystal bars, bead chains and other accessories. After all the hanging, check whether the accessories are complete and hanging properly to ensure safety, and then turn on the crystal chandelier to see the effect.
(4) Connect and fix the lamp board, turn off the power supply, connect the wire with the lamp wire, wrap the adhesive tape, and then fix the lamp board on the back strip.
⑤ Install the bulb on the lamp board, take it out and screw it on the lamp board carefully. After each light bulb is installed, remember to turn on the light to ensure the normal use of the lamps.
⑥ Install relevant accessories according to the instructions, take out the parts in the packing box, assemble and install according to the drawing instructions, and hang the accessories. Crystal chandeliers have different accessories according to their styles, some only have light bulbs, and some also include crystal balls, crystal bars, bead chains and other accessories. After all the hanging, check whether the accessories are complete and hanging properly to ensure safety, and then turn on the crystal chandelier to see the effect.