Question 2: How to design cabinets and what aspects should be paid attention to? The design of cabinets is related to the quality of life of the owner, and it is also the embodiment of the owner's taste in life. The design of cabinets should pay attention to the following aspects: 1. Measure the length, width and height of the room from many different points (such as the height from floor to ceiling and the width from wall to wall) and check any irregularities.
2. Remember to consider the location of all protrusions, such as water pipes, gas meters and water and electricity meters.
3. Pay attention to the location of existing water pipes.
4, pay attention to the location of the existing power socket.
5. Carefully consider where the cabinet and refrigerator are placed, and it is easy to open the door.
6. Plan where lighting is needed.
7, pay attention to the lamps and lanterns is fixed under the wall cabinet, so that you can illuminate the scope of the console.
8. Don't put the gas stove or oven under the window, or the wind may blow out the fire or blow the curtains over the stove.
9. The table beside the oven and gas stove should be empty, so that hot woks and plates can be placed.
10, don't put the refrigerator next to the cooker, or the refrigerator will consume more electricity to keep cool because of the high temperature.
Question 3: How to design the interior of the cabinet to be practical? Make partitions for electrical appliances, baskets and the like you want, and make bowls and the like with two partitions to maximize the use.
Question 4: How can the interior design of cabinets be reasonable? The main points are as follows: 1, depending on the specific structure of the apartment or kitchen;
2. According to the user's habits, which one is the main operator, the operating height;
3, according to the user's self-expectation, whether there are other uses;
4, according to how to use space, beautify the use, etc.
Question 5: What should I do if the cabinet is high? It is recommended to replace the cabinet feet. It is generally impossible to adjust the cabinet foot of 10CM to 5CM.
His adjustment range is generally about 3-4CM (if it is 10CM in the highest case, it can be adjusted to about 6CM at most). There are several kinds of cabinet feet, the longest one is 10CM- 12CM, and the cabinet feet of 5CM are generally not used for a long time.
Question 6: How to make patterns when designing cabinets? What factors should be considered? In the kitchen decoration, the choice of cabinets is very important. Whether to buy ready-made cabinets or let the decoration company make them on the spot is something that makes many consumers hesitate, but practice shows that it is better to let professional cabinet companies tailor clothes. After the cabinet designer personally goes to the customer's home for field measurement, he makes a design plan, and then draws a set of overall cabinet style and functional position in your kitchen with computer software. Owners can fully negotiate with designers according to their own hobbies, confirm the plan, and choose more freely.
In the cabinet design, the following factors should be considered:
The height of the console. The height of the console should be determined according to the height of the person, and it should be designed according to the best ergonomic height without affecting the work. The same is true of hanging cabinets, which are too high to reach or too low to meet often, which are unreasonable designs. Never set the drawer in the corner, lest it is difficult to open.
The kitchen should be neat and unified, all utensils, spices and other items should be in their places, and the storage space should be designed reasonably. Articles (such as pots, liquefied gas tanks, rice barrels, trash cans, etc. ) It should be considered that under the general ground cabinet (operation cabinet), the hanging cabinet should consider more detailed storage space.
There are embedded and countertop cookers. If a countertop cooker is used, the countertop of the cabinet should be lowered to facilitate the cooking operation. Inlet should be provided with air inlet on the ground cabinet.
The materials of cabinets should be fireproof, moisture-proof and easy to clean.
According to the specifications of electrical appliances, install, place or hang them reasonably, and reserve enough space for electrical appliances to facilitate heat dissipation; The range hood should be located as close to the exhaust pipe as possible, and should not be set in front of the window (except for special reasons).
Give full consideration to the space impact brought by various pipelines. When designing cabinets, try not to change the position of drainage pipes and floor drains. Demolishing walls, drilling holes, chiseling the ground and changing smokeless stoves have a great impact on the waterproof of kitchen walls and floors.
The color should be bright, which can make people feel happy when working in the kitchen.
Question 7: How to customize the cabinet? In fact, the price of the whole cabinet is not much different from that of the cabinets you have played. Go directly to the famous brand store to make door panels, but the door hinges must be good. Door panels are double-sided, or fireproof. They are cheap and practical, depending on the size of your kitchen and how many squares you use.
Question 8: Cabinet structure: What parts does the cabinet include? Lead: What is the structure of the cabinet? First of all, from the functional point of view, it is usually divided into three parts: floor cabinet, hanging cabinet and table top. Cabinets can be divided into cabinets, countertops, door panels and accessories in structure. The specific introduction will be below, hoping to help you. Functionally, it is usually divided into three parts: the ground cabinet, the hanging cabinet and the desktop. Cabinets can be divided into cabinets, countertops, door panels and accessories in structure. Structure of cabinet: 1. Side plate and bottom plate structure of the ground cabinet: the adjusting anchor installed in this cabinet must be fixed under the side plate of the cabinet, otherwise it will cause great hidden dangers to users in the future. 2. The apron is fixedly connected with the cabinet body: the apron of the common cabinet has a detachable clamping structure. Even if it is damaged by flooding, the problem can be solved by replacing the apron without hurting the cabinet. 3. Directly seal the backboard: No matter whether the wall is tiled or not, this cabinet structure makes the backboard directly contact the wall, which is easy to cause the backboard to be damp, moldy and deformed. In addition, the backboard hanging cabinet can only be fixed on the wall with iron triangle hanging yards and expansion pipes after being directly nailed. After opening the door, you can directly see the iron triangle in the corner of the hanging cabinet and the bolts coming out directly, which will rust and be unsightly after a long time. 4. The rear body plate is a plug-in structure, but the upper and lower connecting plates are used behind the rear body plate as the keel connected and fixed with the wall: this method is superior to the previous hoisting method, which not only avoids the exposure of the iron triangle, but also makes the interior of the cabinet clean and beautiful. 5. Connection mode between the side panel of the hanging cabinet and the upper and lower panels: The standard connection mode should be a wooden tenon three-in-one connector, which plays the role of locking the connection parts, and the wooden tenon not only plays a firm role in the upper and lower panels, but also plays a role in positioning. Kitchen layout: linear layout, parallel layout, corner layout (L-shaped), bay kitchen (U-shaped), island kitchen and peninsula kitchen. Commonly used desktop materials: artificial stone desktop. Aowei artificial stone is made of natural mineral powder, color masterbatch and acrylic resin. As a solid surface material, it has uniform texture, no pores and excellent processability. Dupont Milanese stone is produced by the most advanced fully enclosed continuous plate molding production line in China, and is continuously cast at high temperature and high pressure. The raw materials are environmentally friendly and are non-toxic and harmless products. Common cabinet door material: Eiger board: Austria Eiger Group is the largest supplier of board in the world, and its Eiger board is made of logs cut, crushed, high temperature and high pressure, and treated with melamine, which is fireproof, wear-resistant, waterproof, soaking, high temperature resistant, scratch-resistant and easy to clean. Molded plastic door panel: the pattern is carved and milled with medium density board as the base material, and the imported veneer is hot-pressed and plastic-sucked. The template has the advantages of rich colors and unique shape. Cushion strips on the countertop are very important, and the countertop is easy to be accepted by the veneer, but it is best to pad aluminum gasket strips, which are stressed, just like the girders in the building. Second, make preparations before buying (1) and personally measure the basic dimensions of your kitchen. Through the size chart of the kitchen, we can know the professional quality of the designer or shopping guide of a company's cabinet company and the basic price configuration of the cabinet. It has a certain guiding role in selecting suitable professionals and cabinets, and prevents blind purchase just because you like the style of cabinets. When drawing the floor plan, it is required to be precise and meticulous, and the positions of doors and windows, as well as water pipes, gas pipes, heating and sockets should be marked. (2) Formulate the cabinet budget. The budget of cabinets includes several parts: 1. The cost of cabinets; 2. The cost of countertops and kitchen utensils; 3. The cost of hardware accessories. Everyone wants their kitchen to be the most beautiful, but they need financial support. Of course, it is impossible for everyone to have money, which requires everyone to balance the gap between ideal and reality. (3) Information provided to designers. In the communication with the designer, you should explain the situation of the kitchen and the needs of your home to him as detailed as possible, and everything in the introduction should be true. 1. Housing condition (location, apartment type, floor plan); 2. The condition of the kitchen (the direction of the pipeline, the direction of the natural gas pipeline); 3. Family members (number. Age, gender, personality, special needs, the height of the main chef in the family, whether he is left-handed or not, and cooking habits. ); 4. Kitchen appliances and eating habits at home. I cook several meals at home every day. Do you like dinner? Some details are best explained to the designer. ); 5. The style you are satisfied with (it is best to have pictures to help you visualize, and ask the designer to make improvements based on this. This is the easiest way. )。 (4) In order to ensure the quality and realize the unity of functionality and decoration, the cabinet, designer and ... >>
Question 9: How to calculate the cabinet size for interior decoration? Cabinets are generally calculated according to the length of meters. A straight cabinet is the length of a straight line, and if it is a corner cabinet, it is the sum of the lengths of two straight lines.
Question 10: What is the bottom of the cupboard in the kitchen? The normal practice under the cabinet is to install 10cm adjusting feet, because the ground can't be horizontal. After installing the adjusting feet, you can adjust the countertop to the level. After installing the cabinet, install the skirting board on the adjusting feet.
Some carpenters adjust their feet with wooden strips, others put wooden strips on the wall, and then put the bottom behind the lower cabinet on the wooden strips to fix the lower cabinet. The front is supported by red bricks, and it is annoying to stick tiles in front.