1, the floor heating is covered with a layer of silly board at the bottom, which is what we often say. The main function is to insulate heat and prevent heat loss. Then spread a layer of tin foil on it, mainly for heat conduction. The pipeline is laid on tin foil, and finally a layer of screen is laid on the pipeline, which is also used for heat conduction. Finally, leveling with cement mortar.
2. Lay a stupid board at the bottom, then lay the pipe on the stupid board, and fill the gap with eight stones around it, or use an hourglass. The function is to conduct heat, and then finally the cement mortar is leveled on it.
3, it is not recommended to use plastic, because if you use plastic, it will release toxic substances when heating, and the smell will be very unpleasant.
4. The purpose of laying aluminum foil paper in floor heating construction is to reflect infrared rays through aluminum foil paper and minimize the heat loss emitted by floor heating pipes. Without the reflection of this aluminum foil paper, more heat will be transferred and consumed through the floor.
5. It mainly plays the role of thermal insulation, which can prevent or reduce the temperature of the heating plate from conducting to the ground to a certain extent, thus making full use of heat to heat above the ground (indoors). Part of the heat of the floor heating heating plate will be absorbed and wasted by the ground. It is recommended to lay it as well as possible.