Crystal word paste wall method 1. After sticking a thin double-sided adhesive tape on the back of the crystal (for temporary fixation), remove the film and use glass glue, and dot the back in many places (it will not be squeezed after pressure). Because that is not used much, the quality of the adhesive becomes better. Please use glass glue. If you can't fix the thin double-sided adhesive, please fix it with hot glue and then apply colored glue.

Crystal word sticking to the wall II. Correct measurement of size and position. Stick cellophane glue directly with crystal word, then cover it with paper tape, and tear it off after half an hour.

Crystal word paste wall method III. Please use the upcoming transfer film. If the characters are not big, the alignment will not be too big. Fixed ground (it is difficult to grasp the operating position of the wall, and it is not suitable to move when it is attached to the wall). Then use the transfer film to paste the previously set crystal characters. On the premise of not using crystalline language, emphasize and insist. Then, the fully bonded crystal characters are rotated and an adhesive is applied. It is recommended to use the strong adhesive commonly used by carpenters. This paste is very dry. Will not flow out like other liquid adhesives. After all the adhesives are applied. After waiting for half a day, when the glue dries, you can move to the wall. As long as the forwarding film is arranged correctly, it must be pasted correctly. Unless you put the text at a curved angle, it won't be completely dry. Please don't puncture the transfer film after pasting, in case it sticks. Listening is great. Be careful. This method is suitable for lowercase letters prepared in advance and pasted at any time.

Crystal word paste wall method 4. Please wipe the wall with dry tableware to ensure dust prevention.

Crystal word paste wall method 5. To set the uniform height of the text, please draw a horizontal line on the wall with a pencil. After that, the characters are evenly distributed, the paste position is marked, and the white side of the characters is coated with glass glue. Please don't spread it too evenly. When the word is pasted on the wall, use paper tape to temporarily hold it by hand, and then use paper tape to temporarily connect the wall with the word. Wait three or four days before tearing the paper tape.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~