Download the "Driver Wizard" software, install it, double-click it to open it —— Driver update —— Check the "Audio-Video Game Controller" —— Start the update —— Restart the computer after the update. If the above two situations do not exist, please look at the following steps directly. Step 3: If there is no small speaker in the lower right corner of the desktop, start-Control Panel-Sound and audio equipment-check "Put the volume icon in the taskbar"-OK. Step ④: Click on the small speaker in the lower right corner of the desktop-Options-Properties-Check all options, and click OK. At this time, you will see a long window, and there are still many things not displayed. Pull the scroll bar below and you will see it. Make sure that all "Mute" is not selected, and pull all the volume bars to the middle. Options-Properties-Recording-Check all options and click OK to pull all volume bars to the middle. Step ⑤: Make sure that your microphone (earphone) is correctly inserted in front of the main chassis. If a speaker is plugged into the back of the main cabinet, please turn off the speaker, but the cable of the speaker can be unplugged. Click Start in the lower left corner of the desktop-Control Panel-and you will see Realtek HD audio configuration (if you don't need to directly look at step 6)-Tick the X tool in the lower left corner of the mixer bar to start multi-channel recording-Tick the X tool in the upper right corner of the audio I/O bar to prohibit front panel jack detection-at this time, the right side of the mixer. Click Start in the lower left corner of the desktop-Control Panel-Sound and Audio Equipment-Audio Bar-Select MIC (pink) on the front panel for recording, and make sure that "Use default equipment only" is not ticked. Click Application-Voice Bar-Select the microphone (pink) on the front panel to record, and then click. Click on the speakers in the lower right corner of the desktop-Options-Properties-Select the Mic (pink) on the front panel in the Mixer-Check all the options below, click OK, and pull all the volume bars to the middle. If you can complete this step, you should be able to. Step 6: Right click on the desktop "My Computer"-Properties-Hardware-Setup Manager-Audio-Video Game Controller-If there is Realtek AC97 audio under this item (if not, you don't need to do step 6): Click on the lower left corner of the desktop to start-Control panel-Audio-Video equipment-Audio bar-Sound playback and audio playback. Make sure that "Use default devices only" is not checked, click Application-Voice bar-Sound playback and recording, and then click OK. Click on the speaker in the lower right corner of the desktop-Options-Properties-Select Realtek AC97 Audio in the "Mixer" and click "Play"-check all the options below and click "OK" to pull all the volume bars to the middle. At this time, it will automatically exit, and you will see a long window with many things not yet displayed. You can see it by pulling the scroll bar below. Make sure that all "Mute" is not selected, and pull all the volume bars to the middle. Try it, a
Question 2: Why is the microphone sound so low in the stereo? Haha, if you meet something "similar", do it my way if it is XP, but if it is not XP, you can try:
1。 Open the control panel in the menu.
2。 Open Realtek high definition audio configuration.
3. Click on the mixer configured by Realtek HD audio and find it on the right side of the playback.
"Back powder In" (There is a forward and backward button in the lower right corner of the play bar, which is used to turn pages. If there is no "back powder", use it to turn pages. If there is no "back powder In", click the wrench icon below the play word, fInd "back powder in", tick in front, and then click OK). This is to adjust the voice of the microphone and realize the audio input to the microphone output. To put it simply, turn on the stereo and speak into the microphone.
Adjustment description of "back powder In": "small speaker" is a switch that can make sound when the speaker speaks into the microphone, and "…" next to the speaker means "microphone enhancement". If the sound emitted by your speaker is very small, it may be that "Microphone Enhancement" is not selected, "Horizontal Adjustment" is the balance of sound, and the default is the general selection (middle point), while "Vertical Adjustment" is to adjust the sound volume.
There is a game called "From My World", which is specially created for karaoke lovers to realize online karaoke. If you are interested, we can PK it. If you still don't understand anything, you can add Q282 190040. Please indicate the overtime hours. I don't usually add strangers.
Question 3: Why is the stereo loud, the microphone loud and the microphone power low? Get a better and stronger microphone. Question 3: I used to use VISTA system, and everything was fine. Later, it was changed to XP. Does it have anything to do with this? Answer: It is also related to the settings, or the recording is not maximized. Why not strengthen the microphone?
Adopt it
Question 4: The microphone sound of this speaker is very low. Is there any way to remedy it? Thank you for your advice. It should be a sensitive issue. Install a microphone preamplifier or use a microphone with high output signal.
Question 5: Stereo microphone has a good sound. But what's wrong with the low voice of the original singer? It is improper use. Just turn down the microphone and turn up the amplifier.
Question 6: My stereo is equipped with a wireless microphone. The volume of other microphones on my speaker is too low. What happened? 20 minutes depends on whether the handset volume is too low or the microphone sensitivity is too low. You can change the microphone with high sensitivity first. You can change it everywhere when you repair the stereo, probably 10~30 yuan. If not, it's the receiver.
Question 7: Why is the microphone plugged into the stereo and the sound is particularly low for 70 minutes? That's the line input jack. The microphone needs a more sensitive jack.
Question 8: Sorry, I just bought a microphone. The stereo is quiet, but the song is loud and the sound is turned to the maximum. Find out what's going on! Microphones have a price level.
Low price, low sound and poor sound quality.
Expensive, loud and good sound quality.
If you buy a condenser microphone above 150 yuan, the sound will be much louder and the sound quality will be much better.
Question 9: The sound of the speaker microphone is low. What if you scream when you play it loudly? The reason is that the sound output by the speaker is received by the microphone, enters the computer or audio receiving equipment again, and the output is received by the microphone again.
This uninterrupted cycle causes the audio received by the microphone to be constantly upgraded and whistled every time.
Solution: 1 First of all, if you are talking about the microphone used by the computer, you can try one way: turn off the amplification function of the microphone in the advanced microphone control.
2. The cost of microphone is not high, and the shielding performance of audio other than main audio is too low. Replaceable microphone with good shielding performance.
3. Adjust the distance between the microphone and the sound source to achieve the shielding effect of the microphone, but if the sound of the sound source is turned up, the distance needs to be increased.
Sometimes adjusting the angle of microphone and sound source can have certain effect, but it is not a long-term solution.
5. There is another method that you already know, changing headphones.
Question 10: What should I do if the stereo sound is extremely small? Stereo sound is very small for several reasons: First, the input stereo signal is very small, which leads to the stereo sound is very small. Second, there is something wrong with the audio line. You can try using an audio cable instead. Third, the problem of the audio itself, due to the internal circuit failure of the audio, the sound is very small, and it needs maintenance to solve the problem.