Connect the video recorder to the computer.

Turn on the video recorder, and then connect the video recorder to the computer with a network cable. Change the automatic acquisition of IP address through local connection to manual.

Change the ip address of the computer to the same network segment as the monitoring address. Enter the IP address of the video recorder in the address bar (192.168.1.108).

Every brand of video recorder has its IP address. Here, choose a Dahua one. Enter the user name and password (admin by default).

After entering the user name and password, a window will appear to set your new user name and password. You can set it yourself here and then remember. Then enter the video recorder selection settings page.

Select network settings

Enter the settings page and select network settings.

Select the settings in the upper right corner after entering the video recorder.

Select TCP/IP.

Select TCP/IP settings.

Set ip address

Enter the ip address, where the ip addresses can be set in sequence.