Starting point: Suzhou
1. Suzhou city driving scheme
1) Depart due south from the starting point, drive for 30 meters, turn left and enter Yinhe No.1 Road.
2) Drive along Yinhe Road180m and turn right into Renmin Road.
3) Drive along Renmin Road for 3.7 kilometers and turn right into Yingbin Avenue.
4) Drive along Yingbin Avenue 1.6km, and turn left into Outer Ring South Road.
2. Drive along the South Outer Ring Road for 330m, turn right slightly, and enter S305.
3. Drive 53.5km along S305, turn left and enter S203.
4. Drive along S203 for 2.3km and go straight into Zhuangzi Avenue.
5. Drive along Zhuangzi Avenue for 2.0km and turn right into Kunpeng West Road.
6. Drive along Kunpeng West Road 1.2km, turn left and enter S203.
7. Drive along S203 for 7.5km, turn left and get on the ramp.
8. Drive along the ramp for 6 10 meters, and turn right into expressway, Luoning.
9. Drive along Luoning Expressway for 9 1.2km, at Bozhou/Taihe exit, turn right slightly and get on the ramp.
10. Drive along the ramp for 7 10 meters, turn right ahead and enter G 105.
1 1. Driving plan of Taihe County
1) Drive along G 105 1.9 km, cross the right triangle garden village for about 50 meters, and go straight into Taihe Avenue.
2) Drive 4.3km along Taihe Avenue, cross Ruiqing Building on the left and turn left into Jianshe East Road.
3) Drive along Jianshe East Road for 90 meters, pass the right side of K500, a national 4S chain store in Gree Electric, and then turn right into Renmin North Road.
4) Drive 340 meters along Renmin North Road and go straight into Renmin Middle Road.
5) Drive along Renmin Middle Road 1.3km to the destination (on the right side of the road).
End point: Taihe county
Question 2: How far is it from Taihe County in Anhui Province to Suxian County in Anhui Province? How to take the driving route: the whole journey is about 203.6 kilometers.
Starting point: Taihe County
1. Fuyang driving plan
1) Start south from the starting point, drive along Renmin Middle Road 140m, and turn around and enter Renmin Middle Road.
2) Drive along Renmin Middle Road 1.3km, pass by Taihe Shen Yuan Electronic Technology Co., Ltd. on the right side for about 130m, and go straight into Renmin North Road.
3) Drive along Renmin North Road for 240 meters, pass Parkson Electric on the right for about 120 meters, and turn left into Jianshe East Road.
4) Drive along Jianshe East Road for 40m, pass Qixia Building on the right for about140m, and turn right into Taihe Avenue.
5) Drive along Taihe Avenue for 4. 1km, pass Qianluzhuang about 140m on the right, and go straight into G 105.
6) Drive along G 105 for 2.0km and turn left on the ramp.
2. Drive along the ramp for 930m and turn right into expressway, Luoning.
3. Drive along Luoning Expressway 172.4km, cross the Jinpu Railway Passenger Overpass, get off at Bengbu North/Guzhen Exit, turn right slightly, and enter the Jinpu Railway Freight Overpass.
4. Drive along the freight overpass of Jinpu Railway 1.5km, and go straight into Banggu Road.
5. Bengbu driving plan
1) Drive along Banggu Road 180m and go straight into S 10 1.
2) follow S 10 1 drive 14.9 km, turn left and enter s10/.
3) Drive 80 meters along S 10 1 and turn right into S10/(old).
4) Drive along S 10 1 (old) for 3.7 kilometers and turn left.
5) Drive 1. 1 km and turn right.
6) Drive 330 meters to the finish line (on the right side of the road).
End point: Suxian County
Question 3: How many kilometers is the driving route from Taihe County to Lingbi County? The whole journey is about 272.6 kilometers.
Starting point: Taihe County
1. Taihe county traffic plan
1) Start south from the starting point, drive along Renmin Middle Road 140m, and turn around and enter Renmin Middle Road.
2) Drive along Renmin Middle Road 1.3km, pass by Taihe Shen Yuan Electronic Technology Co., Ltd. on the right side for about 130m, and go straight into Renmin North Road.
3) Drive along Renmin North Road for 240 meters, pass Parkson Electric on the right for about 120 meters, and turn left into Jianshe East Road.
4) Drive along Jianshe East Road for 40m, pass Qixia Building on the right about140m, and turn right into Taihe Avenue.
5) Drive along Taihe Avenue for 4. 1km, pass Qianluzhuang about 140m on the right, and go straight into G 105.
6) Drive along G 105 for 2.0km and turn left on the ramp.
2. Drive along the ramp for 930m and turn right into expressway, Luoning.
3. Drive along Luoning Expressway for 74.8km, go to S23/ Yang Guo/Dangshan, turn right slightly and enter Wangtuan Hub.
4. Drive along Wangtuan Hub 1. 1 km and go straight into expressway.
5. Drive along Qiqi Expressway for 70.6km, head for Huaibei/Suzhou /S06/S04, turn right slightly, and enter Yueji Hub.
6. Drive 390 meters along the Rose Hub and go straight into the Sudeng Expressway.
7. Drive along Sudeng Expressway for 48.0km, drive in the direction of Sixian/Huai 'an /S04, and turn right slightly to enter Sisu Expressway.
8. Drive along Sisu Expressway for 950 meters, cross Suzhou Hub and go straight into Sisu Expressway.
9. Drive along Sisu Expressway for 58.5km, at Lingbi/Yugou exit, turn right slightly and get on the ramp.
10. Follow the ramp1.2km, turn right and enter X042.
1 1. Suzhou city driving scheme
1) Follow X042 for 5.4 kilometers and turn left into Zhong Ling Avenue.
2) Drive along Zhong Ling Avenue for 520 meters and turn right into Jianshe North Road.
3) Drive 580m along Jianshe North Road, cross Beiguan Bridge about 100m, and go straight into Jianshe Middle Road.
4) Drive 500 meters along Jianshe Middle Road to the finish line.
End point: Lingbi County
Question 4: How many kilometers of driving routes are there in Suxian County, Miaoji Town, Taihe County? The whole journey is about 27 1.8 km.
Starting point: Miaoji Town
1. Fuyang driving plan
1) Start from the starting point to the west, drive along S328 for 8.3 kilometers, cross Tianzhu Square on the left, and turn right into S202.
2) Drive along S202 15.6km and go straight into S202.
2. Drive along S202 1.2km and go straight into Fuxin Expressway.
3. Drive along Fuxin Expressway for 20.6 kilometers and go straight into Chuxin Expressway.
4. Drive along Chuxin Expressway 1. 1 km, drive eastward in the direction of Bozhou/Lu 'an/Anqing/Fuyang, turn right slightly, and enter Sishipu Hub.
5. Drive along Sishipu Hub for 860m, pass Sishipu Hub for about 700m, and go straight into Jiguang Expressway.
6. Drive along Jiguang Expressway for 42.7 kilometers, drive in the direction of Luoyang/Bengbu/Nanjing /G36, turn right slightly and enter Liu Hub.
7. Drive along Liu Hub for 360m, pass Liu Hub for about 820m, and go straight into expressway.
8. Drive along Luoning expressway towards S23/ Yang Guo/Dangshan for 45.8km, turn right slightly and enter Wangtuan Hub.
9. Drive along Wangtuan Hub 1. 1 km and go straight into expressway.
10. Drive along Qiqi Expressway for 70.6 kilometers, then turn right slightly in the direction of Huaibei/Suzhou /S06/S04 and enter Yueji Hub.
1 1. Drive along the Rose Hub for 390 meters and go straight into Sudeng Expressway.
12. Drive along Sudeng Expressway for 48.0km, drive in the direction of Sixian/Huai 'an /S04, and turn right slightly to enter Sisu Expressway.
13. Drive along Sisu Expressway for 950m, cross Suzhou Hub and go straight into Sisu Expressway.
14. Suzhou city driving scheme
1) Drive along Sisu Expressway for 2.0km, get off at Suzhou North/Fuli exit, and turn right slightly on the ramp.
2) Drive along the ramp 1.7km and go straight into G206.
3) Drive along G206 for 4.9 kilometers and go straight into Huiyuan Avenue.
4) Drive along Huiyuan Avenue for 220 meters and turn right into Suzhou Avenue.
5) Drive along Suzhou Avenue 1.2km and turn left into Renmin Road.
6) Drive along Renmin Road 1.8km, cross Yinhe Square on the left and turn right into Yinhe No.1 Road.
7) Drive along Yinhe Road180m and turn right.
8) Drive 20 meters to the finish line.
End point: Suzhou
Question 5: How long does it take to get from Taihe County in Fuyang to Sixian County in Suzhou-Baidu Taihe can take the expressway to Suzhou. It takes about one and a half hours to get to Suzhou. Sixian county takes two and a half hours.
Question 6: How to get to Fuyang Taihe or Fuyang from Suzhou? It is best to 1 to Taihe. Take a train from Suzhou to Fuyang, get off and take a bus to Taihe County.
2. Take a bus from Suzhou to Fuyang. Get off and take the bus.
Question 7: How far is Taihe County in Anhui Province from Dangshan County in Anhui Province? Driving route: the whole journey is about 242.9 kilometers.
Starting point: Taihe County
1. Fuyang driving plan
1) Start south from the starting point, drive along Renmin Middle Road 140m, and turn around and enter Renmin Middle Road.
2) Drive along Renmin Middle Road 1.3km, pass by Taihe Shen Yuan Electronic Technology Co., Ltd. on the right side for about 130m, and go straight into Renmin North Road.
3) Drive along Renmin North Road for 240 meters, pass Parkson Electric on the right for about 120 meters, and turn left into Jianshe East Road.
4) Drive along Jianshe East Road for 40m, pass Qixia Building on the right about140m, and turn right into Taihe Avenue.
5) Drive along Taihe Avenue for 4. 1km, pass Qianluzhuang about 140m on the right, and go straight into G 105.
6) Drive along G 105 for 2.0km and turn left on the ramp.
2. Drive along the ramp for 930m and turn right into expressway, Luoning.
3. Drive along Luoning Expressway for 74.8km, go to S23/ Yang Guo/Dangshan, turn right slightly and enter Wangtuan Hub.
4. Drive along Wangtuan Hub 1. 1 km and go straight into expressway.
5. Drive along Qiqi Expressway for 70.6 kilometers, turn left slightly in the direction of Yongcheng/Bozhou/Dangshan/Xuchang and enter Yueji Hub.
6. Drive along Rose Hub 1.4km, and go straight into Sudeng Expressway.
7. Drive along Sudeng Expressway for 3.2km, cross Huihe Second Bridge, head for Yongcheng/Jining /S97, and turn right slightly on the ramp.
8. Drive along the ramp for 560m and go straight into expressway, Miracle.
9. Drive along Miracle Expressway for 40.9 kilometers and go straight into Qiqi Expressway.
10. Drive along party flag Expressway for 29.0km, at Dangshan exit, turn right slightly and get on the ramp.
1 1. Follow the ramp 1.6 km, turn right and enter G3 10.
12. Suzhou city driving scheme
1) Drive along G3 10 for 6.8km, pass through Maolizhuang village on the right, and then go straight.
2) Drive for 240m, take the 1 exit, and turn right into Yan Xi Road.
3) Drive along Yan Xi Road1.8km, and then turn left.
4) Drive 1.3km and turn right.
5) Drive 30 meters to the finish line.
End point: Dangshan County
Question 8: How many kilometers is the driving route from Taihe County in An Wei Province to Xiaoxian County in Suqian City? The whole journey is about 256.438+0 km.
Starting point: Taihe County
1. Fuyang driving plan
1) Start south from the starting point, drive along Renmin Middle Road 150m, and turn around and enter Renmin Middle Road.
2) Drive along Renmin Middle Road 1.5km and go straight into Renmin North Road.
3) Drive 360m along Renmin North Road and turn left into Jianshe East Road.
4) Drive along Jianshe East Road 180m, turn right ahead and enter Taihe Avenue.
5) Drive 4.9 kilometers along Taihe Avenue and go straight into Beijing-Zhuhai Line.
6) Drive along the Beijing-Zhuhai line 1.4km and turn left.
7) Drive 350 meters, go to Fuyang/Bengbu/Nanjing, turn left slightly, and get on the ramp.
2. Drive along the ramp for 600 meters and go straight into expressway, Luoning.
3. Drive along Luoning Expressway for 74.7 kilometers, turn right slightly and enter Wangtuan Hub.
4. Drive along Wangtuan Hub 1. 1 km and go straight into Suntech expressway.
5. Drive along Suntech Expressway for 70.5km, turn left slightly and enter Rose Hub.
6. Drive along Rose Hub 1.4km, and go straight into Sudeng Expressway.
7. Drive along Sudeng Expressway for 3.2km, and turn right slightly in the direction of Yongcheng/Jining /S97 to get on the ramp.
8. Drive along the ramp for 5 10 meters and go straight into Suntech expressway.
9. Drive along Suntech Expressway for 40.2km, drive in the direction of Shangqiu/Zhengzhou/Xuzhou/Lianyungang, and turn right slightly on the ramp.
10. Drive along the ramp for 780m and go straight into Lianhuo Expressway.
1 1. Drive along Lianhuo Expressway for 37.2km, at Xiaoxian South/Huaibei Exit, turn right slightly and get on the ramp.
12. Follow the ramp for 6 10 meters and go straight.
13. Suzhou city driving scheme
1) Drive for 290 meters, turn left and enter S202.
2) Drive along S202 13. 1km and go straight into Zhongshan South Road.
3) Drive along Zhongshan South Road 1.9 km, turn right ahead and enter Jiaotong East Road.
4) Drive along Jiaotong East Road for 240 meters and turn left.
5) Drive 790 meters and turn left into Datong Street.
6) Drive along Datong Street140m to the end (on the right side of the road).
End point: Xiaoxian County
Question 9: How many kilometers is the drive from Taihe County to Xiaoxian County in An Wei Province? The whole journey is about 22 1.0 km.
Starting point: People in Niqiu Town * * *
1. Start from the starting point to the northeast, drive along the Beijing-Zhuhai line for 40.8km, and turn right ahead.
2. Drive1.5km and enter Sean Road.
3. Drive along Sean Road for 2.6 kilometers, turn right and enter Beijing-Zhuhai Line.
4. Drive along the Beijing-Zhuhai line for 4.9 kilometers and turn left into Ziyuan Road.
5. Drive along Ziyuan Road for 330 meters, and then turn right.
6. Drive 1.7km and go straight into the West First Ring Road.
7. Drive 400 meters along the West First Ring Road and go straight into the Beijing-Zhuhai Line.
8. Drive along the Beijing-Zhuhai line for 5. 1km, and go straight into the West First Ring Road.
9. Drive along the West First Ring Road for 3.8km, then turn right slightly in the direction of Yongcheng/Suzhou/Hefei, and enter Bozhou North Overpass.
10. Drive along Haozhou North Overpass for 430m and go straight into Sudeng Expressway.
1 1. Drive along Sudeng Expressway for 20.7 kilometers and go straight into Yongdeng Expressway.
12. Drive along Yongdeng Expressway for 44. 1km, and then turn right slightly on the ramp.
13. Drive along the ramp 1.0 km and go straight into Suntech expressway.
14. Drive along Suntech Expressway for 40.2km, and turn right slightly on the ramp in the direction of Shangqiu/Zhengzhou/Xuzhou/Lianyungang.
15. Drive along the ramp for 780m and go straight into Lianhuo Expressway.
16. Drive along Lianhuo Expressway for 37.2km, exit at Xiaoxian South/Huaibei, turn right slightly and get on the ramp.
17. Suzhou city driving scheme
1) Drive along the ramp for 6 10 meters and go straight.
2) Drive 290 meters, turn left and enter S202.
3) Drive along S202 13. 1km and go straight into Zhongshan South Road.
4) Drive along Zhongshan South Road for 650m and turn left into century avenue.
5) Drive along century avenue for 670 meters and reach the destination (on the right side of the road).
End point: people from Longcheng Town, Xiaoxian County * * *
Question 10: How far is Taihe County in Fuyang from yingdong district Old Temple in Fuyang? Driving route: the whole journey is about 67.3 kilometers.
Starting point: Taihe County
1. Start south from the starting point, drive along Renmin Middle Road for 390 meters, cross the sugar and liquor building on the left, and go straight into Renmin South Road.
2. Drive along Renmin South Road for 2.4 kilometers and turn left ahead.
3. Drive 170 meters, turn right and enter the Beijing-Zhuhai line.
4. Drive along the Beijing-Zhuhai line for 28.4 kilometers, head for Linquan/Funan/Yingshang/Fuyang urban area, turn right slightly and enter Jieshou Road.
5. Drive along Jieshou Road for 2.5km and turn left into Gu Quan Road.
6. Drive along Gu Quan Road for 3.2km, drive in the direction of Lixin/Xiangyang North Road /G35, and go straight into Yingdong Road.
7. Drive along Yingdong Road for 2.7 kilometers and turn right into Yingdong Road.
8. Drive along Yingdong Road for 570 meters, turn right ahead and enter S305.
9. Drive along S305 for 370 meters and turn left into X025.
10. Drive along X025 for 26.2km and reach the destination (on the right side of the road).
End point: Laomiao Town