2) Pull out the pillow first. Each pillow has two irons inserted into the backrest, and their rods contact the backrest button. Press the button with one finger and pull out the pillow with the other hand.
The pillow is pulled out of the sleeve back cover and the back cover is placed in the back row. The back cover of the back pocket becomes the front bra back cover with adhesive tape, and the plastic shell of the pillow eye is pressed and the cover cloth is fixed to look beautiful.
Usually the bottom cover is equipped with an iron hook; The bottom cover is tiled; The seat surface is covered with cloth; And hanging the seat cloth; 23 buttons on the front of the base; There are 23 drawstrings like schoolbags and straps; Use several elastic belt (called long belts) on both sides of the base cover, and the factory will provide iron shackles (the shackles are not closed, and the factory will use iron hooks to deliver the goods) to cover elastic belt; The iron hook hooks a fixed base cover such as a seat surface spring and an iron.
Please reload the pillow before installing the pillowcase. Reinstall the pillowcase and insert the pillow into the back of the pillowcase. Oh, the back of the pillowcase. The male and female of the adhesive tape should follow the principle of front male and rear female, recognize the back and see if it is installed in place.
3) Its two rows of installation are similar to the first row.
Simple Baidu or Youku input seat cover installation video refer to the car you input it. Fox seat cover installation video special seat cover installation is poor, and the same car structure is similar, and the differences have been counted.